How to service the Brake Master Cylinder on 2001 Dodge Ram 2500 Van?

Before servicing the Brake Master Cylinder, make sure the engine is turned off and push down the brake pedal several times to empty the braking assist mechanism vacuum. After that, take the brake lines from the Brake Master Cylinder and unscrew the nuts that secure the Brake Master Cylinder to the mounting studs. When you are going to replace the Brake Master Cylinder, remember to bleed it first. Secure the new Brake Master Cylinder to the studs, add the mounting nuts and tighten them to 23 Nm (17 ft. lbs.). Next, install the brake lines and tighten them to 16 Nm (145 inch lbs.) and you should finally bleed the brake system at its base.

OEM 2001 Dodge Ram 2500 Van Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2001 Dodge Ram 2500 Van Master Cylinder Part Number: 4897210AB
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897210AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
View related parts
2001 Dodge Ram 2500 Van Reservoir Part Number: 4882865
Product Specifications
- Other Name: Master Cylinder - Brake Master Cylinder; Brake Master Cylinder Reservoir; Reservoir Brake Master Cylinder
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4882865
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2001 Dodge Ram 2500 Van Submodels:
- Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

2001 Dodge Ram 2500 Van Brake Master Cylinder Parts and Q&A

Q: How to service the Brake Master Cylinder on 2001 Dodge Ram 2500 Van?
A: Before servicing the Brake Master Cylinder, make sure the engine is turned off and push down the brake pedal several times to empty the braking assist mechanism vacuum. After that, take the brake lines from the Brake Master Cylinder and unscrew the nuts that secure the Brake Master Cylinder to the mounting studs. When you are going to replace the Brake Master Cylinder, remember to bleed it first. Secure the new Brake Master Cylinder to the studs, add the mounting nuts and tighten them to 23 Nm (17 ft. lbs.). Next, install the brake lines and tighten them to 16 Nm (145 inch lbs.) and you should finally bleed the brake system at its base.