How to Remove and Install the Drive Belt for the Generator, Power Steering, and Air Conditioning on 2002 Chrysler Prowler?

To remove the generator/power steering belt, loosen the tensioner pulley locking nut and adjusting bolt. For the air conditioning belt, raise the vehicle, then repeat the process. Inspect belts for wear; replace if necessary. Use a tension gauge for installation, tightening to 54 Nm (40 ft. lbs.) and re-adjust after engine idle.

OEM 2002 Chrysler Prowler Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Drive Belts found

View related parts
2002 Chrysler Prowler Serpentine Belt Part Number: 4892479AB
$48.28 MSRP: $70.90
You Save: $22.62 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Drive Belt; Alternator Belt; Belt; Belt Accessory Drive
- Replaces: 4573013AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.4 x 4.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892479AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2002 Chrysler Prowler Serpentine Belt Part Number: 4663950AF
Product Specifications
- Other Name: Belt - A/C Compressor; A/C Belt
- Replaces: 4663950AD, 4663950AE, 4663950AC, 4663950
- Item Weight: 0.70 Pounds
- Item Dimensions: 24.2 x 6.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663950AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2002 Chrysler Prowler Drive Belt Parts and Q&A

Q: How to Remove and Install the Drive Belt for the Generator, Power Steering, and Air Conditioning on 2002 Chrysler Prowler?
A: To remove the generator/power steering belt, loosen the tensioner pulley locking nut and adjusting bolt. For the air conditioning belt, raise the vehicle, then repeat the process. Inspect belts for wear; replace if necessary. Use a tension gauge for installation, tightening to 54 Nm (40 ft. lbs.) and re-adjust after engine idle.