How to Remove and Install a MAP Sensor on the Intake Manifold Plenum on 2002 Chrysler Prowler?

To remove the MAP/Temperature sensor from the intake manifold plenum disconnect the electrical connector, remove the securing screws, and remove the sensor. For installation, roll out the sensor, screw fasteners to 3 Nm (26.5 in. lbs.) and reconnect the electrical connector.

OEM 2002 Chrysler Prowler MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2002 Chrysler Prowler M.A.P. Sensor Part Number: 5293985AA
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Pressure Sensor; MAP Sensor; Sensor Map
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.3 x 1.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5293985AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 6 Cyl 3.5 L GAS

2002 Chrysler Prowler MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on the Intake Manifold Plenum on 2002 Chrysler Prowler?
A: To remove the MAP/Temperature sensor from the intake manifold plenum disconnect the electrical connector, remove the securing screws, and remove the sensor. For installation, roll out the sensor, screw fasteners to 3 Nm (26.5 in. lbs.) and reconnect the electrical connector.