How to Effectively Remove and Install an Oxygen Sensor in an Engine on 2002 Chrysler Prowler?

Two upstream oxygen sensors and two downstream oxygen sensors are provided on the engine. Make sure that the engine is cooled before a removal. Unplug the electrical connector, take off using a socket and clean the threads. Tighten to 28 Nm (20 ft. lbs.) and re-connect electrical connector.

OEM 2002 Chrysler Prowler Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oxygen Sensor found

View related parts
2002 Chrysler Prowler Oxygen Sensor, Front Part Number: 4606133AC
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 1.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606133AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 6 Cyl 3.5 L GAS

2002 Chrysler Prowler Oxygen Sensor Parts and Q&A

Q: How to Effectively Remove and Install an Oxygen Sensor in an Engine on 2002 Chrysler Prowler?
A: Two upstream oxygen sensors and two downstream oxygen sensors are provided on the engine. Make sure that the engine is cooled before a removal. Unplug the electrical connector, take off using a socket and clean the threads. Tighten to 28 Nm (20 ft. lbs.) and re-connect electrical connector.