How to Remove and Install a Knock Sensor in an Engine on 2002 Chrysler Prowler?

To delete the knock sensor situated below the intake manifold, at first detach the intake manifold plenum and manifold. Disconnect the electrical connector of the sensor and use a crows foot socket to pull out the bolt. Reinstall by tightening the bolt to 10 Nm, reattaching the electrical connector and reattaching the manifolds.

OEM 2002 Chrysler Prowler Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2002 Chrysler Prowler Knock Sensor Part Number: 4686364AA
Product Specifications
- Other Name: Sensor - Detonation; Sensor Detonation
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.9 x 4.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Prowler Submodels:
- Base | 6 Cyl 3.5 L GAS

2002 Chrysler Prowler Knock Sensor Parts and Q&A

Q: How to Remove and Install a Knock Sensor in an Engine on 2002 Chrysler Prowler?
A: To delete the knock sensor situated below the intake manifold, at first detach the intake manifold plenum and manifold. Disconnect the electrical connector of the sensor and use a crows foot socket to pull out the bolt. Reinstall by tightening the bolt to 10 Nm, reattaching the electrical connector and reattaching the manifolds.