How to Maintain a Back Up Light Switch on 2002 Chrysler PT Cruiser?

To service the back up lamp switch, jack up the vehicle and remove the switch connector. Unscrew the switch from the transaxle, apply Teflon tape on the threads and tighten to 24 Nm (18 ft. lbs.). Reconnect the connector, lower the vehicle and test the operation of the back up lamp.

OEM 2002 Chrysler PT Cruiser Back Up Light Switch

Reverse Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Back Up Light Switches found

View related parts
2002 Chrysler PT Cruiser Back-Up Switch Part Number: 4864775
$49.65 MSRP: $72.85
You Save: $23.20 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Back Up Lamp; Switch, Back - Up Lamp; Switch Back Up Lamp
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.0 x 3.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4864775
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2002 Chrysler PT Cruiser Switch, Rear Part Number: 4671670AB
Product Specifications
- Other Name: Switch - Electric Back Light; Window Defroster Switch, Rear; Switch Electric Back Light
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.1 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671670AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler PT Cruiser Submodels:
- Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2002 Chrysler PT Cruiser Back Up Light Switch Parts and Q&A

Q: How to Maintain a Back Up Light Switch on 2002 Chrysler PT Cruiser?
A: To service the back up lamp switch, jack up the vehicle and remove the switch connector. Unscrew the switch from the transaxle, apply Teflon tape on the threads and tighten to 24 Nm (18 ft. lbs.). Reconnect the connector, lower the vehicle and test the operation of the back up lamp.