How to Maintain and Fix a Window Motor on 2002 Chrysler PT Cruiser?

This is to fix the power window motor; pull up the window, disconnect the negative battery cable and stick the door trim panel. Disassemble the electrical harness of the motor, disassemble the window regulator, and disassemble the motor. Install the motor again, and the harness, and the door, then re-connect the battery.

OEM 2002 Chrysler PT Cruiser Window Motor

Window Lift Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Window Motors found

View related parts
2002 Chrysler PT Cruiser Window Motor, Rear Driver Side Part Number: 5017815AB
Product Specifications
- Other Name: Motor - Window Regulator; Power Window Motor, Front Left, Rear Left; Motor Window Regulator
- Position: Rear Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017815AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler PT Cruiser Submodels:
- Base, Dream, GT, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
2002 Chrysler PT Cruiser Window Motor, Front Passenger Side Part Number: 5017814AB
Product Specifications
- Other Name: Motor - Window Regulator; Power Window Motor, Front Right, Rear Right; Motor Window Regulator
- Position: Front Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017814AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Chrysler PT Cruiser Submodels:
- Base, Dream, GT, Limited, Touring | 4 Cyl 2.4 L GAS

2002 Chrysler PT Cruiser Window Motor Parts and Q&A

Q: How to Maintain and Fix a Window Motor on 2002 Chrysler PT Cruiser?
A: This is to fix the power window motor; pull up the window, disconnect the negative battery cable and stick the door trim panel. Disassemble the electrical harness of the motor, disassemble the window regulator, and disassemble the motor. Install the motor again, and the harness, and the door, then re-connect the battery.