How to Remove and Install a Camshaft Position Sensor on 2002 Chrysler Voyager?

In order to change the camshaft position sensor, unscrew the negative battery cable, and connectors. Disconnected the sensor with the screws and looseness of the target magnet. Install new sensor and magnet with screw tightening to recommended torque. input the electrical connector and the negative battery cable again.

OEM 2002 Chrysler Voyager Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2002 Chrysler Voyager Camshaft Position Sensor Part Number: 5093508AA
Product Specifications
- Other Name: Sensor Packkage - Camshaft; Engine Camshaft Position Sensor; Camshaft Sensor; Sensor Package Camshaft
- Replaces: 4882851AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.5 x 2.6 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5093508AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Voyager Submodels:
- Base, Ec, LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2002 Chrysler Voyager Camshaft Position Sensor Part Number: 4686353
Product Specifications
- Other Name: Sensor - Camshaft; Engine Camshaft Position Sensor; Camshaft Positioni Sensor; Camshaft Sensor; Cam Sensor; Sensor D.I.S. Camshaft Reference; Sensor Camshaft
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.6 x 3.4 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686353
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Chrysler Voyager Submodels:
- Base, LX, SE | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

2002 Chrysler Voyager Camshaft Position Sensor Parts and Q&A

Q: How to Remove and Install a Camshaft Position Sensor on 2002 Chrysler Voyager?
A: In order to change the camshaft position sensor, unscrew the negative battery cable, and connectors. Disconnected the sensor with the screws and looseness of the target magnet. Install new sensor and magnet with screw tightening to recommended torque. input the electrical connector and the negative battery cable again.