JeepParts
My Garage
My Account
Cart
OEM 2002 Chrysler Voyager Oxygen Sensor
Oxygen O2 Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Oxygen Sensors found
2002 Chrysler Voyager Oxygen Sensor, Front Part Number: 4686938AB
$131.39 MSRP: $197.00You Save: $65.61 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.2 x 1.3 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686938AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Chrysler Voyager Oxygen Sensor, Rear Part Number: 4686935AB
$141.50 MSRP: $212.00You Save: $70.50 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 22.7 x 2.1 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4686935AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Chrysler Voyager Oxygen Sensor, Front Part Number: 4727436AA
Product Specifications- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727436AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Chrysler Voyager Oxygen Sensor Parts and Q&A
- Q: How to Maintain and Fix Upstream and Downstream Oxygen Sensors on 2002 Chrysler Voyager?A: The first step is to take off the negative battery cable and lift the car up, so you can reach the upstream oxygen sensor (1/1). Take out the electrical connector and place a Snap-On YA8875 or similar socket onto the sensor to remove it. With an 18 mm X 1.5 + 6E tap, remove any old sealing compound and, if you are using the original sensor, add Loctite 771-64 anti-seize compound or the same kind. To install the sensor, start by cleaning the thread of the exhaust manifold, put anti-seize on the sensor threads when needed and tighten it to 27 Nm (20 ft. lbs.). After you've reconnected the electrical connector and secured it to the bracket, bring the vehicle down and put the negative cable back in place. Located on the side of the catalytic converter, add the new downstream oxygen sensor 2/1 which has factory-coated threads. Tighten it to 27 Nm (20 ft. lbs.) without using any more anti-seize compound. Once you've connected the electrical connector, bring the vehicle down and connect the negative battery cable.
Related 2002 Chrysler Voyager Parts
2002 Chrysler Voyager Camshaft Position Sensor
2002 Chrysler Voyager Coolant Temperature Sensor
2002 Chrysler Voyager Engine Control Module
2002 Chrysler Voyager Headlight Switch
2002 Chrysler Voyager Horn
2002 Chrysler Voyager Ignition Coil
2002 Chrysler Voyager Intake Manifold Temperature Sensor
2002 Chrysler Voyager Knock Sensor
2002 Chrysler Voyager MAP Sensor
2002 Chrysler Voyager Mirror Switch
2002 Chrysler Voyager Seat Belt
2002 Chrysler Voyager Throttle Position Sensor