How to Install a Belt Tensioner on a 4.7L Engine on 2002 Dodge Durango?

For 4.7L engines, make sure that the indexing tang of the tensioner is within 24mm from the stop, when installing a new belt. If not, look for problems such as faulty belt, worn out bearings or alignment problems. Replace the belt if the tensioner arrow is at the minimum tension indicator. Follow the correct installation procedure for the tensioner and belt.

OEM 2002 Dodge Durango Belt Tensioner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Belt Tensioners found

View related parts
2002 Dodge Durango Serpentine Tensioner Part Number: 53010158AC
Product Specifications
- Other Name: Tensioner - Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Automatic Belt Tensioner.; Tensioner
- Replaces: 53010158AB
- Item Weight: 2.90 Pounds
- Item Dimensions: 6.7 x 7.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53010158AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 5.2L V8, 5.9L V8, 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Durango Serpentine Tensioner Part Number: 53030958
Product Specifications
- Other Name: Tensioner - Alternator Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Drive Kit; Tensioner Pulley.; Tensioner; Tensioner Belt; Belt Tensioner
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53030958
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2002 Dodge Durango Submodels:
- Base, SLT, SLT Plus, SXT, Sport | 8 Cyl 4.7 L GAS

2002 Dodge Durango Belt Tensioner Parts and Q&A

Q: How to Install a Belt Tensioner on a 4.7L Engine on 2002 Dodge Durango?
A: For 4.7L engines, make sure that the indexing tang of the tensioner is within 24mm from the stop, when installing a new belt. If not, look for problems such as faulty belt, worn out bearings or alignment problems. Replace the belt if the tensioner arrow is at the minimum tension indicator. Follow the correct installation procedure for the tensioner and belt.