How to Service a Throttle Position Sensor on 2002 Dodge Intrepid?

To service the Throttle Position Sensor (TPS), remove the negative battery cable, disconnect the TPS connector and unscrew the TPS. Make sure that the throttle shaft is in TPS socket, line up screw holes and fix with screws at 5.1 Nm. Confirm that the throttle plate is closed before connecting the battery back on.

OEM 2002 Dodge Intrepid Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Position Sensors found

View related parts
2002 Dodge Intrepid Throttle Position Sensor Part Number: 68405580AA
$93.36 MSRP: $208.00
You Save: $114.64 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68405580AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2002 Dodge Intrepid Throttle Position Sensor Part Number: 4897247AA
$79.83 MSRP: $101.20
You Save: $21.37 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Throttle Position; Throttle Positionition Sensor; Idle Control Motor; Idle Speed Control; Sensor Kit Throttle Position
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.9 x 3.0 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4897247AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS

2002 Dodge Intrepid Throttle Position Sensor Parts and Q&A

Q: How to Service a Throttle Position Sensor on 2002 Dodge Intrepid?
A: To service the Throttle Position Sensor (TPS), remove the negative battery cable, disconnect the TPS connector and unscrew the TPS. Make sure that the throttle shaft is in TPS socket, line up screw holes and fix with screws at 5.1 Nm. Confirm that the throttle plate is closed before connecting the battery back on.