Other Name: Handle - Interior Door; Interior Door Handle, Front Right Inner; Handle Assembly, Door Inside, Right; Handle Interior Door; Interior Door Handle
Position: Front Inner Passenger Side
Item Weight: 0.60 Pounds
Item Dimensions: 7.2 x 3.2 x 2.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55075338
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2002 Dodge Ram 2500 Submodels:
Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
Other Name: Handle - Interior Door; Interior Door Handle, Front Left Inner; Handle Assembly, Door Inside, Right; Handle Interior Door; Interior Door Handle
Position: Front Inner Driver Side
Item Weight: 0.60 Pounds
Item Dimensions: 7.4 x 3.2 x 2.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55075339
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2002 Dodge Ram 2500 Submodels:
Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
2002 Dodge Ram 2500 Door Handle Parts and Q&A
Q: How to Maintain and Fix a Rear Door Handle on 2002 Dodge Ram 2500?
A: Remove the screw outside to release the inside handle for the rear door. Following this, take out the door trim panel and separate the rod from the actuator. Afterward, disconnect the nuts to pull out the remote handle actuator. For installation, start by attaching the remote handle actuator with nuts and tighten them to 10 N.m (89 in.lbs). The latch actuator rod should be attached next, the door trim panel installed afterward and then the inside handle with the bolt fixed at 9 N.m (80 in.lbs).