Other Name: Module - ABS; ABS Control Module; Modulator Valve; Module Anti-Lock Brakes
Replaces: 5017705AA, 5018422AA, 5018422AB
Item Weight: 2.30 Pounds
Item Dimensions: 10.0 x 7.5 x 5.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5018422AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2002 Dodge Ram 2500 Van Submodels:
Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
2002 Dodge Ram 2500 Van ABS Control Module Parts and Q&A
Q: How to service and repair the ABS Control Module on 2002 Dodge Ram 2500 Van?
A: Remove the battery and disconnect it from the battery cables before fixing the Controller Antilock Brake. After that, remove the power distribution center and its mount, then take out the washer reservoir screws. Pull the reservoir upward to take off the pump motor and pump hose from the connector, then take the reservoir out of the engine area. Disconnect the pump harness locks, pull out the connectors from the CAB and remove the connector from the pump motor. Take out the screws securing the Communication Access Unit to the Hand Control Assembly and then remove the CAB. Set the CAB onto the HCU with the seal in the proper place for installation to work properly. After installing the screws, twist them to 4.4 Nm and securely join the power connectors to the CAB. Bottom cover fixture in the engine compartment and link the pump motor and hose, after which add the mounting screws on the washer reservoir. After that, connect the mount for the power distribution center, mount the center and bring in the battery with all the associated cables. If you decide to change the CAB, add the rear axle code and the revolutions per mile tires turn into it.