JeepParts
My Garage
My Account
Cart
OEM 2002 Dodge Ram 3500 Door Hinge
Interior Door Hinge- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Door Hinges found
2002 Dodge Ram 3500 Upper Hinge, Front Passenger Side Part Number: 55075956AC
$78.27 MSRP: $119.00You Save: $40.73 (35%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hinge - Door; Door Hinge, Front Right Upper; Door Hinge
- Position: Front Upper Passenger Side
- Replaces: 55075956AB
- Item Weight: 2.60 Pounds
- Item Dimensions: 6.4 x 6.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55075956AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Ram 3500 Lower Hinge Part Number: 55275464AC
$68.41 MSRP: $103.00You Save: $34.59 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hinge - Door; Door Hinge Repair Kit; Door Hinge
- Replaces: 55275464AB
- Item Weight: 2.40 Pounds
- Item Dimensions: 6.5 x 6.7 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55275464AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Product Specifications- Other Name: Hinge - Door; Door Hinge, Front Left Upper; Door Hinge Repair Kit; Door Hinge; Hinge
- Position: Front Upper Driver Side
- Replaces: 55075957AB
- Item Weight: 2.60 Pounds
- Item Dimensions: 6.4 x 6.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55075957AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2002 Dodge Ram 3500 Door Hinge Parts and Q&A
- Q: How to Maintain and Fix a Door Hinge Without Taking Off the Door on 2002 Dodge Ram 3500?A: If only one hinge is being replaced at a time and the epoxy coated washers are kept, the door does not need to be removed for repair. Open the front door and place a grease pencil mark where the upper hinge on the door meets the b-pillar. Take out the most inboard nut and bolt on the hinge, then pull the three bolts connecting the hinge to the b-pillar to free it up. For this part, make a mark on the door and b-pillar where the hinge will go, remove the lower b-pillar trim to access through and unbolt the hinge from the door. After that, take out the two bolts at the b-pillar, then reach into the car to unbolt and remove the hinge from the b-pillar. For placing the upper hinge in the car, add all the washers back in place and reinstall the nut and bolt, tightening it to 28 N.m (21 ft.lbs), then attach and tighten the three upper hinge to b-pillar bolts as before. Adjust the door setting as needed. After placing the lower hinge and the attached b-pillar bolts, tighten them using 28 N.m (21 ft.lbs). Afterward, return the door washers, install the nut and bolt and tighten the same way. If the door won't close correctly, adjust it and then put back the lower b-pillar trim.
Related 2002 Dodge Ram 3500 Parts
2002 Dodge Ram 3500 Cup Holder
2002 Dodge Ram 3500 Door Check
2002 Dodge Ram 3500 Door Handle
2002 Dodge Ram 3500 Door Lock Actuator
2002 Dodge Ram 3500 Door Lock Cylinder
2002 Dodge Ram 3500 Door Lock Switch
2002 Dodge Ram 3500 Fuel Door
2002 Dodge Ram 3500 Rear Door Striker
2002 Dodge Ram 3500 Seat Switch
2002 Dodge Ram 3500 Trunk Lid Latch
2002 Dodge Ram 3500 Wheelhouse
2002 Dodge Ram 3500 Window Crank Handles