How to Service an Engine Mount on 2002 Dodge Ram 3500?

Before servicing the front engine mount, begin by removing the viscous fan/drive assembly and taking off the negative battery cable. Hang the vehicle over a hoist and prop the engine up with a screw jack and wooden block. First, unscrew the special thru-bolt on the passenger side and the nut, then remove the bracket to engine mount bolts attached to the transmission oil cooler. Rise the engine and take out the four mount to block bolts, followed by removing the whole mount from the vehicle. To install the engine mount, raise the engine a bit, put the mount on the block, screw in the bolts and tighten them to 149 Nm (110 ft. lbs.) torque. Put the thru-bolt into position on the engine mount, drop the motor into its place and move the mount and thru-bolt so they rest on the frame-mounted cushion brackets and then tighten the thru-bolt nut to 88 Nm (65 ft. lbs.) torque. On the passenger side, put in the two transmission oil cooler support brackets and tighten the bolts to 47 Nm (35 ft. lbs.) torque. Remove the lifting fixture, set the car down, fit back the viscous fan/drive plug and connect the battery negative cables.

OEM 2002 Dodge Ram 3500 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2002 Dodge Ram 3500 Motor Mount Part Number: 52021490AC
$416.86 MSRP: $548.00
You Save: $131.14 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Mount; Insulator Engine Mount
- Replaces: 52021490AB
- Item Weight: 10.20 Pounds
- Item Dimensions: 6.6 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021490AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 6 Cyl 5.9 L DIESEL
View related parts
2002 Dodge Ram 3500 Motor Mount, Driver Side Part Number: 52018235AB
$72.15 MSRP: $119.00
You Save: $46.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount; Insulator Engine Mount
- Position: Driver Side
- Item Weight: 6.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52018235AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Ram 3500 Rear Mount Part Number: 52058218
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 4.70 Pounds
- Item Dimensions: 9.0 x 3.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52058218
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Ram 3500 Motor Mount Part Number: 52021491AC
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Mount; Insulator Engine Mount
- Replaces: 52021491AB
- Item Weight: 10.40 Pounds
- Item Dimensions: 7.9 x 6.2 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021491AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 6 Cyl 5.9 L DIESEL
View related parts
2002 Dodge Ram 3500 Rear Mount Part Number: 52021367AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 3.20 Pounds
- Item Dimensions: 9.0 x 4.3 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021367AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 6 Cyl 5.9 L DIESEL
View related parts
2002 Dodge Ram 3500 Motor Mount, Passenger Side Part Number: 52058804AB
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount; Insulator Engine Mount
- Position: Passenger Side
- Item Weight: 6.70 Pounds
- Item Dimensions: 8.6 x 5.0 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52058804AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 8 Cyl 5.9 L GAS
View related parts
2002 Dodge Ram 3500 Rear Mount Part Number: 52020251AA
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Engine Mount Rear Transmission Support; Insulator Engine Mount
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.9 x 3.0 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020251AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Dodge Ram 3500 Submodels:
- Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS

2002 Dodge Ram 3500 Engine Mount Parts and Q&A

Q: How to Service an Engine Mount on 2002 Dodge Ram 3500?
A: Before servicing the front engine mount, begin by removing the viscous fan/drive assembly and taking off the negative battery cable. Hang the vehicle over a hoist and prop the engine up with a screw jack and wooden block. First, unscrew the special thru-bolt on the passenger side and the nut, then remove the bracket to engine mount bolts attached to the transmission oil cooler. Rise the engine and take out the four mount to block bolts, followed by removing the whole mount from the vehicle. To install the engine mount, raise the engine a bit, put the mount on the block, screw in the bolts and tighten them to 149 Nm (110 ft. lbs.) torque. Put the thru-bolt into position on the engine mount, drop the motor into its place and move the mount and thru-bolt so they rest on the frame-mounted cushion brackets and then tighten the thru-bolt nut to 88 Nm (65 ft. lbs.) torque. On the passenger side, put in the two transmission oil cooler support brackets and tighten the bolts to 47 Nm (35 ft. lbs.) torque. Remove the lifting fixture, set the car down, fit back the viscous fan/drive plug and connect the battery negative cables.