How to Install and Remove a Cruise Control Servo on 2002 Jeep Grand Cherokee?

To remove the speed control servo, disconnect the battery cables, air cleaner housing, and servo cable. Remove the battery tray and unplug the temperature sensor. Detach the vacuum line and electrical connector at the servo. For installation, reverse the process making sure that the torque and connections are correct before starting the engine.

OEM 2002 Jeep Grand Cherokee Cruise Control Servo

Cruise Control Servo Speed

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Servo found

View related parts
2002 Jeep Grand Cherokee Cruise Servo Part Number: 4669979
Product Specifications
- Other Name: Servo - Speed Control; Cruise Control Servo; Actuator; Servo; Servo Speed Control
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.4 x 4.9 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669979
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- 5.9 Limited, 65th Anniversary Edition, Laredo, Limited, Orvis, Overland, SRT8, Special Edition, Sport, TSi | 6 Cyl 3.0 L DIESEL, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8 Cyl 6.1 L GAS

2002 Jeep Grand Cherokee Cruise Control Servo Parts and Q&A

Q: How to Install and Remove a Cruise Control Servo on 2002 Jeep Grand Cherokee?
A: To remove the speed control servo, disconnect the battery cables, air cleaner housing, and servo cable. Remove the battery tray and unplug the temperature sensor. Detach the vacuum line and electrical connector at the servo. For installation, reverse the process making sure that the torque and connections are correct before starting the engine.