How to Service and Repair a Steering Knuckle on 2002 Jeep Grand Cherokee?

In order to service the steering knuckle, take out the hub bearing and axle shaft. Ball studs Use Tool Kit 6289. Disassemble the tie-rod and cotter pins and nuts and strike the knuckle to loosen. Reassemble by tightening nuts to a given torque and reassembling.

OEM 2002 Jeep Grand Cherokee Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2002 Jeep Grand Cherokee Knuckle, Front Driver Side Part Number: 5011977AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Left; Knuckle Front
- Position: Front Driver Side
- Item Weight: 7.60 Pounds
- Item Dimensions: 9.2 x 8.2 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011977AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS
View related parts
2002 Jeep Grand Cherokee Knuckle, Front Passenger Side Part Number: 5011976AB
Product Specifications
- Other Name: Knuckle - Front; Steering Knuckle, Front Right; Knuckle Front
- Position: Front Passenger Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 14.7 x 11.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011976AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2002 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 6 Cyl 4.0 L GAS, 8 Cyl 4.7 L GAS

2002 Jeep Grand Cherokee Steering Knuckle Parts and Q&A

Q: How to Service and Repair a Steering Knuckle on 2002 Jeep Grand Cherokee?
A: In order to service the steering knuckle, take out the hub bearing and axle shaft. Ball studs Use Tool Kit 6289. Disassemble the tie-rod and cotter pins and nuts and strike the knuckle to loosen. Reassemble by tightening nuts to a given torque and reassembling.