How to Maintain a Water Pump on 2.0L/2.4L Engines on 2003 Chrysler Sebring?

Before servicing the water pump on 2.0L/2.4L engines, take out the negative battery cable and drain the cooling system. Following this, take the timing belt out, in addition to the camshaft sprockets and the rear timing belt cover, off the engine. After that, remove the water pump by removing the screws that hold it. Installation requires putting an O-ring in the groove on the water pump body so it is properly seated and will not damage or leak. Put the pump body onto the engine block and tighten the screws up to 12 Nm (105 in. lbs.). Following this, spin the pump by hand to guarantee it moves without difficulty. Afterward, replace the rear timing belt cover, mount the camshaft sprockets, insert the timing belt and top up the cooling system.

OEM 2003 Chrysler Sebring Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Water Pumps found

View related parts
2003 Chrysler Sebring Water Pump Part Number: 4694307AF
$92.66 MSRP: $141.00
You Save: $48.34 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 4694307AE, 4694307AB, 4694307AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.1 x 5.8 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4694307AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2003 Chrysler Sebring Water Pump Part Number: 4663732AD
$81.46 MSRP: $120.00
You Save: $38.54 (33%)
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly; Pump Water
- Replaces: 4663732AC
- Item Weight: 2.20 Pounds
- Item Dimensions: 7.0 x 6.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663732AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Water Pump Part Number: 1300A011
$239.32 MSRP: $304.00
You Save: $64.68 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly; Pump Water
- Replaces: MD978743
- Item Weight: 4.30 Pounds
- Item Dimensions: 9.9 x 6.7 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1300A011
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- LX, LXi, Limited | 3.0L V6, 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Water Pump Part Number: MD976464
Product Specifications
- Other Name: Pump - Water; Engine Water Pump; Water Pump Assembly; Pump Water
- Item Weight: 2.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD976464
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS

2003 Chrysler Sebring Water Pump Parts and Q&A

Q: How to Maintain a Water Pump on 2.0L/2.4L Engines on 2003 Chrysler Sebring?
A: Before servicing the water pump on 2.0L/2.4L engines, take out the negative battery cable and drain the cooling system. Following this, take the timing belt out, in addition to the camshaft sprockets and the rear timing belt cover, off the engine. After that, remove the water pump by removing the screws that hold it. Installation requires putting an O-ring in the groove on the water pump body so it is properly seated and will not damage or leak. Put the pump body onto the engine block and tighten the screws up to 12 Nm (105 in. lbs.). Following this, spin the pump by hand to guarantee it moves without difficulty. Afterward, replace the rear timing belt cover, mount the camshaft sprockets, insert the timing belt and top up the cooling system.