Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2003 Chrysler Town & Country Oxygen Sensor

Oxygen O2 Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

  • 2003 Chrysler Town & Country Oxygen Sensor - 4686938AB
    2003 Chrysler Town & Country Oxygen Sensor Diagram - 4686938AB
    View related parts

    2003 Chrysler Town & Country Oxygen Sensor, Front Part Number: 4686938AB

    $131.39 MSRP: $197.00
    You Save: $65.61 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Front Oxygen Sensor; Sensor Oxygen
    • Position: Front
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 6.2 x 1.3 x 1.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4686938AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2003 Chrysler Town & Country Submodels:
    • Base, EL, EX, LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
  • 2003 Chrysler Town & Country Oxygen Sensor - 4686935AB
    2003 Chrysler Town & Country Oxygen Sensor Diagram - 4686935AB
    View related parts

    2003 Chrysler Town & Country Oxygen Sensor, Rear Part Number: 4686935AB

    $141.50 MSRP: $212.00
    You Save: $70.50 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor; Sensor Oxygen
    • Position: Rear
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 22.7 x 2.1 x 1.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 4686935AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2003 Chrysler Town & Country Submodels:
    • Base, EL, EX, LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2003 Chrysler Town & Country Oxygen Sensor Parts and Q&A

  • Q: How to Maintain an Oxygen Sensor Effectively on 2003 Chrysler Town & Country?
    A: To maintain the oxygen sensor in the upstream position, first remove the battery and battery tray. Take the speed control vacuum harness and the electrical connector off the servo; then remove the speed control servo and bracket. When removing the sensor, use the Snap-On YA8875 or a sufficiently powerful alternative. Thread cleaning should be carried out with an 18 mm X 1.5 + 6E tap and if the initial sensor is reused, apply Loctite 771-64 anti-seize compound or a similar alternative to the threads. When installing, first clean the manifold threads using the same tap, then apply anti-seize compound to the original sensor's threads if you can and tighten the sensor to 27 Nm (20 ft. lbs.). Link up the O2 sensor electrical connector and attach it where it belongs, then do the same for the speed control servo. Insert the speed control servo, the servo bracket and its vacuum harness and put in the battery tray along with the battery.

Related 2003 Chrysler Town & Country Parts

Alternate Year Models

+
2002 Chrysler Town & Country Oxygen Sensor 2004 Chrysler Town & Country Oxygen Sensor