How to Install and Connect an Oxygen Sensor on Chrysler Town & Country?

Both of the oxygen sensors in the engine are heated. Once the sensor is taken out, use an 18 mm X mm 1.5 + six tap to clean the exhaust manifold threads. For the original sensor, put on an anti-seize product such as Loctite 771-64 or its equal on the threads; new sensors come with this applied and should not be treated again. Mount the sensor by turning the torque screw to 41 Nm (30 ft. lbs.). Afterward, link the O2 sensor's electrical connector to its bracket and make sure it's securely fastened, before you connect the servo's electrical connector. Attach the speed control servo to the drone, add its bracket and join the speed control vacuum harness to the servo. Next, set in place the battery tray and the battery.

How to Remove the Downstream Oxygen Sensor for a 3.3/3.8L Engine on Chrysler Town & Country?

Always cool the engine before removing the downstream oxygen sensor, so you don't get burned by radiating heat. Before proceeding, get the O2S removal tool needed for the procedure. Elevate and support the car to begin and after that, separate the O2S wire harness clips from the engine or body if possible. Disconnect the O2S pigtail harness from the vehicle's engine wiring, then remove the O2S from the catalytic converter. Take care of the upstream oxygen sensor the way you did with the downstream, making sure to stop the engine, let it cool, remove the harness and hook up the O2S tool. Again, stand the vehicle up, take off the O2S wire harness guides, disconnect the O2S pigtail harness from the engine wiring harness and remove the O2S from the catalytic converter.

OEM Chrysler Town & Country Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Oxygen Sensors found

View related parts
Chrysler Town & Country Oxygen Sensor, Front Passenger Side Part Number: 5149180AB
$123.50 MSRP: $182.00
You Save: $58.50 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Oxygen Sensor; includes upstream and downstream sensors for both driver and passenger sides.
- Position: Front Passenger Side
- Replaces: 5149180AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor, Front Part Number: 56029084AA
$152.73 MSRP: $231.00
You Save: $78.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor, Front Part Number: 56029050AA
$77.38 MSRP: $114.00
You Save: $36.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2010 Chrysler Town & Country | Base, EX, LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor, Front Driver Side Part Number: 56029049AA
$97.32 MSRP: $144.00
You Save: $46.68 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Rear Oxygen Sensor; Front Oxygen Sensor; Upper Oxygen Sensor; Lower Oxygen Sensor; Sensor Oxygen
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor, Rear Part Number: 56029085AA
$85.52 MSRP: $127.00
You Save: $41.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Rear; Front Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor, Front Part Number: 5149171AB
$129.16 MSRP: $190.00
You Save: $60.84 (33%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Oxygen Sensors: Front, Rear, Upper, Lower, Passenger/Driver Side, Before/After Catalytic Converter.
- Position: Front
- Replaces: 5149171AA, 68066160AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor Part Number: 5233088
$56.80 MSRP: $73.11
You Save: $16.31 (23%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen (Use Insulation 4209476), 4 Cylinder Engine; Sensor, Oxygen; Ambient Temperature Console.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor, Front Part Number: 56029052AA
$99.22 MSRP: $151.00
You Save: $51.78 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Town & Country | Base, EX, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor, Front Part Number: 4686938AB
$131.39 MSRP: $197.00
You Save: $65.61 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor, Rear Part Number: 4686935AB
$141.50 MSRP: $212.00
You Save: $70.50 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor Part Number: 5227368
Product Specifications
- Other Name: Sensor - Heated; Sensor, Oxygen - Heated 2.2L Engine; Sensor, Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor Part Number: 4727225AB
Product Specifications
- Other Name: Sensor - Oxygen; Sensor Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Town & Country | LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor Part Number: 4727225
Product Specifications
- Other Name: Sensor - Oxygen; Sensor Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chrysler Town & Country | LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor Part Number: 4686222
Product Specifications
- Other Name: Sensor - Exhaust Gas Oxygen; Sensor, Oxygen Catalytic Efficiency Monitor (Downstream) W/O Tlev
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chrysler Town & Country | Base, LX, LXi, SX | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor Part Number: 4686154
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen (Use Insulation 4209476), 4 Cylinder Engine; Oxygen Sensors for various engines.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chrysler Town & Country | Base, LX, LXi, SX | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Oxygen Sensor Part Number: 4686154AB
Product Specifications
- Other Name: Sensor - Oxygen; Sensor Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Town & Country | LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Oxygen Sensor

Choose OEM Oxygen Sensor that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Oxygen Sensor follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Oxygen Sensor in Chrysler Town & Country automobiles helps in tracking the composition of the fuel and air in the exhaust of the car engine. Under normal conditions unburned oxygen is sensed and the signal generated is compared to the atmospheric signal to provide a voltage signal which gives the engine control the go-ahead to off-set the mixture. It has a sensing element made of zirconium dioxide which has a layer of platinum to function at high temp and stove between rich/lean states to test catalytic converter efficiency. The typical ones that have been described are ordinary oxygen sensors, while some new cars employ wideband air/fuel ratio sensors. Specifically, contamination and age cause sensors to fail, which affects the vehicle's emissions and fuel efficiency; therefore, maintaining vehicles is critical for the optimal functionality.

Chrysler Town & Country Oxygen Sensor Parts and Q&A

Oxygen Sensor, Front
56029050AA
Q: How to Install and Connect an Oxygen Sensor on Chrysler Town & Country?
A:
Both of the oxygen sensors in the engine are heated. Once the sensor is taken out, use an 18 mm X mm 1.5 + six tap to clean the Exhaust Manifold threads. For the original sensor, put on an anti-seize product such as Loctite 771-64 or its equal on the threads; new sensors come with this applied and should not be treated again. Mount the sensor by turning the torque screw to 41 Nm (30 ft. lbs.). Afterward, link the O2 sensor's electrical connector to its bracket and make sure it's securely fastened, before you connect the servo's electrical connector. Attach the speed control servo to the drone, add its bracket and join the speed control vacuum harness to the servo. Next, set in place the Battery Tray and the battery.
Oxygen Sensor, Front
56029084AA
Q: How to Remove the Downstream Oxygen Sensor for a 3.3/3.8L Engine on Chrysler Town & Country?
A:
Always cool the engine before removing the downstream oxygen sensor, so you don't get burned by radiating heat. Before proceeding, get the O2S removal tool needed for the procedure. Elevate and support the car to begin and after that, separate the O2S wire harness clips from the engine or body if possible. Disconnect the O2S pigtail harness from the vehicle's engine wiring, then remove the O2S from the Catalytic Converter. Take care of the upstream oxygen sensor the way you did with the downstream, making sure to stop the engine, let it cool, remove the harness and hook up the O2S tool. Again, stand the vehicle up, take off the O2S wire harness guides, disconnect the O2S pigtail harness from the engine wiring harness and remove the O2S from the catalytic converter.