How to Install an Automatic Transmission Filter on 2003 Dodge Durango?

Place a newly packaged oil filter seal into the oil pump intake hole first, smoothing the seal against the oil pump using the butt end of a hammer or an appropriate object. This will prevent inserting the oil filter seal onto the filter bore. Now, set the replacement filter onto the valve body and into the oil pump and use the screw to secure it after tightening it to 4.5 Nm (40 in. lbs. ). Don't forget to fit a new cooler return filter on the transmission, making sure to torque it properly to 14.12 Nm (125 in. lbs.). Put a bead of RTV sealant on the transmission case sealing area and then fit the pan on top of the transmission. Bolts should be tightened to 11.8 Nm (105 in. lbs.) torque after removing air bubbles under the pan. Now, lower the vehicle and put in Mopar ATF +4 to fill the transmission.

OEM 2003 Dodge Durango Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Filters found

View related parts
2003 Dodge Durango Filter Part Number: 52118789
$39.90 MSRP: $57.70
You Save: $17.80 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Valve Body; Transmission Filter; Hydraulic Filter; Filter Valve Body
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.3 x 7.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52118789
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Base, R/T, SLT, SLT Plus, SXT, Sport | 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Oil Filter Part Number: 5015267AD
$51.86 MSRP: $77.10
You Save: $25.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: 4X2 Filter - Transmission Oil; Transmission Filter; Hydraulic Filter; Filter
- Replaces: 5015267AC
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.4 x 5.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Adventurer, Limited, R/T, SE, SLT, SLT Plus, ST, SXT, Sport | 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
View related parts
2003 Dodge Durango Oil Filter Part Number: 5179267AD
$37.41 MSRP: $54.00
You Save: $16.59 (31%)
ADD TO CART
Product Specifications
- Other Name: Filter Package - Transmission Oil; Transmission Filter; Transmission Filter Kit; Hydraulic Filter; Filter; Filter Package Transmission Oil
- Replaces: 5179267AC, 4799662AB, 5179267AA, 5179267AB, 4799662AC, 4799662
- Item Weight: 1.50 Pounds
- Item Dimensions: 3.2 x 3.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Durango Submodels:
- Adventurer, Base, Citadel, Crew, Express, Heat, Limited, R/T, SE, SLT, SLT Plus, ST, SXT, Special Service, Sport | 4.7L V8, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Durango Automatic Transmission Filter Parts and Q&A

Q: How to Install an Automatic Transmission Filter on 2003 Dodge Durango?
A: Place a newly packaged oil filter seal into the oil pump intake hole first, smoothing the seal against the oil pump using the butt end of a hammer or an appropriate object. This will prevent inserting the oil filter seal onto the filter bore. Now, set the replacement filter onto the valve body and into the oil pump and use the screw to secure it after tightening it to 4.5 Nm (40 in. lbs. ). Don't forget to fit a new cooler return filter on the transmission, making sure to torque it properly to 14.12 Nm (125 in. lbs.). Put a bead of RTV sealant on the transmission case sealing area and then fit the pan on top of the transmission. Bolts should be tightened to 11.8 Nm (105 in. lbs.) torque after removing air bubbles under the pan. Now, lower the vehicle and put in Mopar ATF +4 to fill the transmission.