How to Service and Repair a Drive Belt for the A/C Compressor and Power Steering Pump on 2003 Dodge Neon?

Rotate the tensioner clockwise with a 17 mm wrench until the belt comes off the power steering pump pulley and afterwards, gently release the spring tension on the tensioner. After that, eliminate the drive belt and clear all loose material from the belt pulley grooves, making them oil, grease and coolant free, before installing the new one. You should replace the belt if you notice plenty of wear, frayed cords or deep glazing on the belt; normal cracks along the ribbed side of the Poly-V are expected, but cracks that are parallel are not. Guide and attach the belt so it goes around every pulley and so all of its V-grooves fit over the V-shaped grooves of the pulleys. Place the belt on all pulleys except for the power steering pump's pulley and then tighten up the belt with the 17 mm wrench so you can fit the belt around the power steering pulley's pulley. Once installed, check that the belt's length indicator falls between the given minimum and maximum marks, with the indicator on the new belt close to the nominal belt length mark.

OEM 2003 Dodge Neon Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Drive Belts found

View related parts
2003 Dodge Neon Serpentine Belt Part Number: 4668380AF
$24.18 MSRP: $35.80
You Save: $11.62 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator Drive; Accessory Drive Belt; Alternator Belt; Belt Alternator Drive
- Replaces: 4668380AC, 4668380AE, 4668380AD, 4668380AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 0.7 x 4.0 x 16.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4668380AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, High Line, R/T, SRT-4, Sport | 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Serpentine Belt Part Number: 4891519AE
$31.56 MSRP: $47.05
You Save: $15.49 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Power Steering Belt; A/C Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 4891519AC, 4891519AD, 4891519AB
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 8.2 x 11.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4891519AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- SRT-4 | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Serpentine Belt Part Number: 4668241AE
$33.75 MSRP: $50.25
You Save: $16.50 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator Drive; Accessory Drive Belt; Serpentine Belt Drive Kit; V-Belt; Alternator Belt; Belt Alternator Drive; Drive Belt
- Replaces: 4668241AD, 4668241AC, 4668241
- Item Weight: 18.60 Pounds
- Item Dimensions: 23.7 x 16.5 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4668241AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
2003 Dodge Neon Serpentine Belt Part Number: 55111074AC
$32.96 MSRP: $48.85
You Save: $15.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Coolant Recovery Bottle; Engine, Washer, Radiator Caps; Serpentine & V-Belts; Reservoir Cap; Filler Cap; Reservoir Tank Cap; Recovery Tank Cap; Cap
- Replaces: 55111074AA, 4682828, 5017468AA, 55111074AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55111074AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 1.6L L4, 2.0L L4, 2.4L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Serpentine Belt Part Number: 4668247AH
$27.47 MSRP: $40.60
You Save: $13.13 (33%)
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Drive Belt; Power Steering Belt
- Replaces: 4668247AE, 4668247AF, 4668247, 4668247AB, 4668247AC, 4668247AG
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4668247AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Serpentine Belt Part Number: 4668249AF
Product Specifications
- Other Name: Belt - Power Steering; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Power Steering Belt; Belt Power Steering
- Replaces: 4668249AD, 4668249AE
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4668249AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 2.0L L4, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2003 Dodge Neon Drive Belt Parts and Q&A

Q: How to Service and Repair a Drive Belt for the A/C Compressor and Power Steering Pump on 2003 Dodge Neon?
A: Rotate the tensioner clockwise with a 17 mm wrench until the belt comes off the power steering pump pulley and afterwards, gently release the spring tension on the tensioner. After that, eliminate the drive belt and clear all loose material from the belt pulley grooves, making them oil, grease and coolant free, before installing the new one. You should replace the belt if you notice plenty of wear, frayed cords or deep glazing on the belt; normal cracks along the ribbed side of the Poly-V are expected, but cracks that are parallel are not. Guide and attach the belt so it goes around every pulley and so all of its V-grooves fit over the V-shaped grooves of the pulleys. Place the belt on all pulleys except for the power steering pump's pulley and then tighten up the belt with the 17 mm wrench so you can fit the belt around the power steering pulley's pulley. Once installed, check that the belt's length indicator falls between the given minimum and maximum marks, with the indicator on the new belt close to the nominal belt length mark.