How to Service and Repair a Wheel Cover on 2003 Dodge Neon?

Raise the vehicle first in order to service or repair the wheel cover. Never use a tool to pry off the bolt-on wheel cover. Remove the 5 nuts that secure the wheel and wheel cover to the car and afterward, lift off the cover so the tire doesn't become unattached as you remove the wheel. Make sure the back of the wheel touches the center of the brake disc or drum tightly when you install it to stop the loosening of the wheel's mounting nuts. Do not use oil or grease on wheel studs or wheel mounting nuts. Put the tire and wheel assembly on the wheel studs without the mounting nuts, cover the valve notch in the wheel cover with the wheel valve and carefully mount it on the hub-mounted studs. Put the wheel mounting nuts in place and loosely tighten them, following the sequence, then lower the vehicle. Tighten the 5 wheel nuts in the sequence given, stopping after they are half torqued and finally torque them properly to 135 Nm (100 ft. lbs.).

OEM 2003 Dodge Neon Wheel Cover

Wheel Protector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Covers found

View related parts
2003 Dodge Neon Wheel Cover, Silver, Center Part Number: 4284004
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Center Cap, Machine Finish Aluminum, Used W/ (Wh1), (Whk) Wheel; 15X6.0 Cast Aluminum Shelby.
- Position: Center
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.2 x 2.2 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4284004
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Center Cap Part Number: SE30PAKAA
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap; Cap Wheel Center Machine Finish Aluminum; Cap Wheel Center
- Position: Center
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 2.1 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: SE30PAKAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- ACR, Base, ES, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Center Cap Part Number: TP02PAKAA
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 3.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: TP02PAKAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Wheel Cover Part Number: 5272694AA
Product Specifications
- Other Name: Cover - Wheel; Wheel Center Cap; Cover Wheel
- Item Weight: 2.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272694AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Neon Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2003 Dodge Neon Wheel Cover Part Number: 5272693AA
Product Specifications
- Other Name: Cover - Wheel; Wheel Center Cap; Cover Wheel
- Item Weight: 2.30 Pounds
- Item Dimensions: 15.9 x 15.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5272693AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Neon Submodels:
- R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2003 Dodge Neon Wheel Cover Parts and Q&A

Q: How to Service and Repair a Wheel Cover on 2003 Dodge Neon?
A: Raise the vehicle first in order to service or repair the wheel cover. Never use a tool to pry off the bolt-on wheel cover. Remove the 5 nuts that secure the wheel and wheel cover to the car and afterward, lift off the cover so the tire doesn't become unattached as you remove the wheel. Make sure the back of the wheel touches the center of the brake disc or drum tightly when you install it to stop the loosening of the wheel's mounting nuts. Do not use oil or grease on wheel studs or wheel mounting nuts. Put the tire and wheel assembly on the wheel studs without the mounting nuts, cover the valve notch in the wheel cover with the wheel valve and carefully mount it on the hub-mounted studs. Put the wheel mounting nuts in place and loosely tighten them, following the sequence, then lower the vehicle. Tighten the 5 wheel nuts in the sequence given, stopping after they are half torqued and finally torque them properly to 135 Nm (100 ft. lbs.).