How Should the Intake Manifold Temperature Sensor Be Managed During Service on 2003 Dodge Ram 2500?

The Intake Manifold Temperature Sensor/MAP (IAT/MAP) sensor which is on top of the intake manifold, should be handled with care during service. First, clean around the sensor before you break the connection between it and the wires. Loosen the two T-15 Torx head screws that keep the sensor in place and remove the sensor from the car's intake manifold. Look over the sensor O-ring and check that it appears to be in good condition. A fresh O-ring should be checked and the sensor attachment area on the intake manifold should be cleaned. Set up the sensor in the manifold, followed by installing and tightening the two screws. Now, put the electrical connector back into place on the sensor.

OEM 2003 Dodge Ram 2500 Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Manifold Temperature Sensors found

View related parts
2003 Dodge Ram 2500 Temperature Sensor Part Number: 56028364AA
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Air Charge Temperature Sensor; Air Temperature Sensor; Ambient Temperature Sensor; Air Intake Temperature Sensor; Duct Air Temperature Sensor.
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028364AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2003 Dodge Ram 2500 Air Temperature Sensor Part Number: 56027872
$38.87 MSRP: $57.85
You Save: $18.98 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Air Temperature; Engine Intake Manifold Temperature Sensor; Intake Air Temperature Sensor; Air Intake Temperature Sensor; Temperature Sending Unit; Sensor Ambient Temperature; Sensor Air Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.9 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56027872
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Ram 2500 Intake Manifold Temperature Sensor Parts and Q&A

Q: How Should the Intake Manifold Temperature Sensor Be Managed During Service on 2003 Dodge Ram 2500?
A: The Intake Manifold Temperature Sensor/MAP (IAT/MAP) sensor which is on top of the intake manifold, should be handled with care during service. First, clean around the sensor before you break the connection between it and the wires. Loosen the two T-15 Torx head screws that keep the sensor in place and remove the sensor from the car's intake manifold. Look over the sensor O-ring and check that it appears to be in good condition. A fresh O-ring should be checked and the sensor attachment area on the intake manifold should be cleaned. Set up the sensor in the manifold, followed by installing and tightening the two screws. Now, put the electrical connector back into place on the sensor.