How to Remove and Install a MAP Sensor on 2003 Dodge Ram 2500?

This sensor which serves two functions, is found at the top of the intake manifold. First, make sure the area around the sensor is clean and afterward, pull the connector free from the IAT/MAP sensor. Using two T-15 Torx screws, take off the screws and remove the sensor located in the intake manifold. Review the O-ring on the filter's sensor housing carefully. Before installing anything, make sure the sensor's O-ring is good and remove dirt from the area around the sensor at the intake manifold. Attach the sensor into the correct spot in the intake manifold, tighten the two screws and connect the electrical cable to the sensor.

OEM 2003 Dodge Ram 2500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 MAP Sensors found

View related parts
2003 Dodge Ram 2500 Map Sensor Part Number: 68430063AA
$148.30 MSRP: $226.00
You Save: $77.70 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Temperature Barometric Abso; Barometric Sensor
- Replaces: 53034235AA, 53032649AA, 68050010AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.2 x 2.0 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68430063AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 5.9L L6, 6 Cyl 5.9 L DIESEL
View related parts
2003 Dodge Ram 2500 M.A.P. Sensor Part Number: 56028562AB
$31.84 MSRP: $45.80
You Save: $13.96 (31%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.1 x 1.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56028562AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
2003 Dodge Ram 2500 M.A.P. Sensor Part Number: 68430060AA
$174.88 MSRP: $341.00
You Save: $166.12 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map
- Replaces: 4896131AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68430060AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS
View related parts
2003 Dodge Ram 2500 Map Sensor Part Number: 4896131AC
$231.13 MSRP: $341.00
You Save: $109.87 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Sensor Map; Pressure Sensor
- Replaced by: 68430060AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896131AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 2500 Submodels:
- Base, Laramie, SLT, ST | 10 Cyl 8.0 L GAS

2003 Dodge Ram 2500 MAP Sensor Parts and Q&A

Q: How to Remove and Install a MAP Sensor on 2003 Dodge Ram 2500?
A: This sensor which serves two functions, is found at the top of the intake manifold. First, make sure the area around the sensor is clean and afterward, pull the connector free from the IAT/MAP sensor. Using two T-15 Torx screws, take off the screws and remove the sensor located in the intake manifold. Review the O-ring on the filter's sensor housing carefully. Before installing anything, make sure the sensor's O-ring is good and remove dirt from the area around the sensor at the intake manifold. Attach the sensor into the correct spot in the intake manifold, tighten the two screws and connect the electrical cable to the sensor.