Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2003 Dodge Ram 2500 Van Drive Shaft

Axle Shaft
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Drive Shafts found

  • 2003 Dodge Ram 2500 Van Drive Shaft - 52105412AA
    2003 Dodge Ram 2500 Van Drive Shaft Diagram - 52105412AA
    View related parts

    2003 Dodge Ram 2500 Van Drive Shaft Part Number: 52105412AA

    Product Specifications
    • Other Name: Shaft - Drive; Driveshaft; Shaft Drive
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52105412AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2003 Dodge Ram 2500 Van Submodels:
    • Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS
  • 2003 Dodge Ram 2500 Van Drive Shaft - 52105410AA
    2003 Dodge Ram 2500 Van Drive Shaft Diagram - 52105410AA
    View related parts

    2003 Dodge Ram 2500 Van Drive Shaft Part Number: 52105410AA

    Product Specifications
    • Other Name: Shaft - Drive; Driveshaft; Shaft Drive
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52105410AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2003 Dodge Ram 2500 Van Submodels:
    • Base | 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS
  • 2003 Dodge Ram 2500 Van Drive Shaft - 52105411AC
    2003 Dodge Ram 2500 Van Drive Shaft Diagram - 52105411AC
    View related parts

    2003 Dodge Ram 2500 Van Drive Shaft Part Number: 52105411AC

    Product Specifications
    • Other Name: Shaft - Drive; Driveshaft
    • Replaces: 52105411AB
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52105411AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following 2003 Dodge Ram 2500 Van Submodels:
    • Base | 6 Cyl 3.9 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.2 L LPG, 8 Cyl 5.9 L GAS

2003 Dodge Ram 2500 Van Drive Shaft Parts and Q&A

  • Q: How to service and repair the drive shaft on 2003 Dodge Ram 2500 Van?
    A: Place safety stands under the vehicle, lift it and put the transmission in Neutral to gain access to the propeller shaft. Draw a line high on the axle pinion yoke or companion flange and on the propeller shaft or companion yoke, as a guide for installation. For Dana axles, first remove the bolts that hold the universal joint clamps to the pinion yoke. For Corporate axles, take off the bolts holding the companion yoke to the companion flange. Once the slip yoke is off the output shaft, the propeller shaft can be removed. Installation is done by fitting the slip yoke over the transmission or transfer case output shaft and matching the reference marks on the propeller shaft or companion yoke with the pinion yoke or companion flange. Place the universal joint into the outer yoke on the Dana axle, fasten the bolts to 29 Nm (22 ft. lbs.). Place the companion yoke on the companion flange for Corporate axles, tighten its bolts to 108 Nm (80 ft. lbs.) and move along to the next step. Once done, drive the car to the ground.

Related 2003 Dodge Ram 2500 Van Parts

Alternate Year Models

+
2002 Dodge Ram 2500 Van Drive Shaft