How to Service and Repair the Rear Brake Disc on Dual Rear Wheels on 2003 Dodge Sprinter 3500?

First, pop up and secure the vehicle. Then, take the wheels off. Take lift the rear disc brake pads and the disc brake caliper adapter out of the tire assembly too. Set the parking brake and add two lug studs to the disc brake rotor before you take out the locking bolt. Uninstall the wheel flange ring and locking bolt for the disc brake rotor and afterward remove the two lug nuts. Let go of the parking brake and loosen the park brake adjuster so you have space for removal and then pull out the rear disc brake rotor. Fit the disc brake disc onto the hub and tighten it down with two lug studs. After parking the brake, attach the rotor locking bolt and fasten it to 23 Nm (204 inch lbs.). Then, install the disc brake caliper adapter and tighten it to 170 Nm (125 ft. lbs.), next install the wheel flange ring and tighten it to 200 Nm (148 ft. lbs.). Attach the brake pads, let down the parking break and adjust as required. Pull the brake several times, verify that the fluid is at the right level and top it off if required and afterward fit the back wheels and reduce the vehicle.

OEM 2003 Dodge Sprinter 3500 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Discs found

View related parts
2003 Dodge Sprinter 3500 Rotor, Front Part Number: 5103602AD
$142.02 MSRP: $184.00
You Save: $41.98 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 5103602AC, 5103602AA, 5103602AB
- Item Weight: 15.70 Pounds
- Item Dimensions: 3.1 x 11.2 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103602AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Sprinter 3500 Submodels:
- Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
2003 Dodge Sprinter 3500 Rotor, Rear Part Number: 5103606AC
$95.73 MSRP: $178.00
You Save: $82.27 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaces: 5103606AB, 5103606AA
- Item Weight: 16.40 Pounds
- Item Dimensions: 11.5 x 11.6 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103606AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Sprinter 3500 Submodels:
- Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
2003 Dodge Sprinter 3500 Rotor, Rear Part Number: 5103603AE
$81.21 MSRP: $182.00
You Save: $100.79 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor; Brake Disc
- Position: Rear
- Replaces: 5103603AA, 5103603AC, 5103603AB, 5103603AD
- Item Weight: 36.00 Pounds
- Item Dimensions: 5.8 x 11.1 x 11.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103603AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL
View related parts
2003 Dodge Sprinter 3500 Rotor, Front Part Number: 5114479AC
$138.08 MSRP: $187.00
You Save: $48.92 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: 5114479AB, 5114479AA
- Item Weight: 17.20 Pounds
- Item Dimensions: 3.1 x 11.5 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5114479AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Sprinter 3500 Submodels:
- Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
2003 Dodge Sprinter 3500 Rotor, Rear Part Number: 5104562AA
$56.40 MSRP: $71.50
You Save: $15.10 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Rear; Brake Disc; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Item Weight: 15.50 Pounds
- Item Dimensions: 14.3 x 14.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104562AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL
View related parts
2003 Dodge Sprinter 3500 Rotor, Front Part Number: 5104561AA
Product Specifications
- Other Name: Rotor - Brake; Disc Brake Rotor, Front; Disc Brake Hardware Kit; Rotor Brake; Disc Brake Rotor; Brake Rotor
- Position: Front
- Item Weight: 17.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104561AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Sprinter 3500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL

2003 Dodge Sprinter 3500 Brake Disc Parts and Q&A

Q: How to Service and Repair the Rear Brake Disc on Dual Rear Wheels on 2003 Dodge Sprinter 3500?
A: First, pop up and secure the vehicle. Then, take the wheels off. Take lift the rear disc brake pads and the disc brake caliper adapter out of the tire assembly too. Set the parking brake and add two lug studs to the disc brake rotor before you take out the locking bolt. Uninstall the wheel flange ring and locking bolt for the disc brake rotor and afterward remove the two lug nuts. Let go of the parking brake and loosen the park brake adjuster so you have space for removal and then pull out the rear disc brake rotor. Fit the disc brake disc onto the hub and tighten it down with two lug studs. After parking the brake, attach the rotor locking bolt and fasten it to 23 Nm (204 inch lbs.). Then, install the disc brake caliper adapter and tighten it to 170 Nm (125 ft. lbs.), next install the wheel flange ring and tighten it to 200 Nm (148 ft. lbs.). Attach the brake pads, let down the parking break and adjust as required. Pull the brake several times, verify that the fluid is at the right level and top it off if required and afterward fit the back wheels and reduce the vehicle.