How to Remove and Install a Brake Light Switch on 2003 Dodge Stratus?

First, pump the brake pedal while pushing the brake lamp switch counter-clockwise by a few degrees and then draw the switch backward from its holder. Take out the connection between the wiring harness and the switch. Start the installation by removing the plunger from its up position until it locks into place. Fix the wiring harness connector on the brake lamp switch, then put the switch into the foot brake bracket by squeezing the brake pedal as hard as possible and aligning its index tab with the mounting bracket's slot. Twist the switch about 30 degrees to the right so that it remains straight up and down. Be gentle while turning the switch so you do not injure the switch or striker. Allow the release of the brake pedal so the switch will begin to ratchet backward into the proper position. Be sure the brake lamps turn on and off properly when using the brake pedal.

OEM 2003 Dodge Stratus Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Light Switches found

View related parts
2003 Dodge Stratus Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
- Base, ES, R/T, SE, SE Plus, SXT | 2.0L L4, 2.4L L4, 2.5L V6, 2.7L V6, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Dodge Stratus Brake Switch Part Number: MB596608
$23.33 MSRP: $29.57
You Save: $6.24 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Stoplamp Switch, 2 Contact Points, with Speed Control.
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MB596608
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Stratus Submodels:
- R/T | 6 Cyl 3.0 L GAS
View related parts
2003 Dodge Stratus Stoplamp Switch Part Number: 8614A023
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8614A023
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Stratus Submodels:
- R/T | 6 Cyl 3.0 L GAS

2003 Dodge Stratus Brake Light Switch Parts and Q&A

Q: How to Remove and Install a Brake Light Switch on 2003 Dodge Stratus?
A: First, pump the brake pedal while pushing the brake lamp switch counter-clockwise by a few degrees and then draw the switch backward from its holder. Take out the connection between the wiring harness and the switch. Start the installation by removing the plunger from its up position until it locks into place. Fix the wiring harness connector on the brake lamp switch, then put the switch into the foot brake bracket by squeezing the brake pedal as hard as possible and aligning its index tab with the mounting bracket's slot. Twist the switch about 30 degrees to the right so that it remains straight up and down. Be gentle while turning the switch so you do not injure the switch or striker. Allow the release of the brake pedal so the switch will begin to ratchet backward into the proper position. Be sure the brake lamps turn on and off properly when using the brake pedal.