How to Service and Repair a MAP Sensor on 2003 Dodge Stratus?

Always start by disconnecting the negative battery cable to service and repair the Manifold Pressure/Vacuum Sensor. Remove the MAP sensor's electrical connector and take out the two screws holding it onto the intake manifold for the 4-cylinder model. For this model, also loosen the negative battery terminal, snap off the electrical connector linking the MAP sensor and remove the sensor bolt. For the 4-cylinder, affix the sensor, install and screw it in place, plug the MAP sensor's electrical connector and reattach the negative battery cable at last. Mount the sensor on the 2.7L model's intake manifold plenum, tighten the screws to 4.5 Nm (40 in. lbs.), hook up the electrical cord to the sensor and then reinstall the negative battery cable.

OEM 2003 Dodge Stratus MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 MAP Sensors found

View related parts
2003 Dodge Stratus M.A.P. Sensor Part Number: 68430060AA
$174.88 MSRP: $341.00
You Save: $166.12 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map
- Replaces: 4896131AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68430060AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2003 Dodge Stratus Map Sensor Part Number: 4896131AC
$231.13 MSRP: $341.00
You Save: $109.87 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Sensor Map; Pressure Sensor
- Replaced by: 68430060AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896131AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
- ES, R/T, SE, SE Plus, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2003 Dodge Stratus M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Stratus Submodels:
- ES, R/T, SE, SXT | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2003 Dodge Stratus Map Sensor Part Number: MD305600
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; Tank, Engine Air Intake Surge; Sensor Map; Pressure Sensor
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD305600
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2003 Dodge Stratus Submodels:
- R/T | 6 Cyl 3.0 L GAS

2003 Dodge Stratus MAP Sensor Parts and Q&A

Q: How to Service and Repair a MAP Sensor on 2003 Dodge Stratus?
A: Always start by disconnecting the negative battery cable to service and repair the Manifold Pressure/Vacuum Sensor. Remove the MAP sensor's electrical connector and take out the two screws holding it onto the intake manifold for the 4-cylinder model. For this model, also loosen the negative battery terminal, snap off the electrical connector linking the MAP sensor and remove the sensor bolt. For the 4-cylinder, affix the sensor, install and screw it in place, plug the MAP sensor's electrical connector and reattach the negative battery cable at last. Mount the sensor on the 2.7L model's intake manifold plenum, tighten the screws to 4.5 Nm (40 in. lbs.), hook up the electrical cord to the sensor and then reinstall the negative battery cable.