How to Change an Oil Filter on 2004 Chrysler Concorde?

To do the job, open the engine filter with an oil filter wrench, empty it into a container and then discard it according to environmental laws. After that, wipe down the bottom of the filter and examine the gasket where it makes contact. Apply some clean engine oil to the gasket of the new filter, set it on the oil base and tighten it to 16 Nm (12 ft. lbs.), using the filter wrench if the gasket doesn't make full contact with the base. If you've drained the crankcase, replace it with the correct engine oil and let the engine run while checking for any fluid leaks.

OEM 2004 Chrysler Concorde Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2004 Chrysler Concorde Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Concorde Submodels:
- Base, LX, LXi, Limited | 2.7L V6, 3.2L V6, 3.3L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

2004 Chrysler Concorde Oil Filter Parts and Q&A

Q: How to Change an Oil Filter on 2004 Chrysler Concorde?
A: To do the job, open the engine filter with an oil filter wrench, empty it into a container and then discard it according to environmental laws. After that, wipe down the bottom of the filter and examine the gasket where it makes contact. Apply some clean engine oil to the gasket of the new filter, set it on the oil base and tighten it to 16 Nm (12 ft. lbs.), using the filter wrench if the gasket doesn't make full contact with the base. If you've drained the crankcase, replace it with the correct engine oil and let the engine run while checking for any fluid leaks.