How to Bleed a Brake Master Cylinder on 2004 Chrysler PT Cruiser?

To bleed the brake master cylinder, hold it in a vise. For non-ABS units, connect four bleed tubes to the ports and immerse the ends of the tubes in brake fluid. For ABS units, two specific tubes are used. Fill the reservoir and push on the pistons to get rid of air, then remove the tubes and plug the ports.

OEM 2004 Chrysler PT Cruiser Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2004 Chrysler PT Cruiser Master Cylinder Part Number: 5015160AA
$243.26 MSRP: $308.38
You Save: $65.12 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.40 Pounds
- Item Dimensions: 13.3 x 6.8 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015160AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler PT Cruiser Submodels:
- Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
2004 Chrysler PT Cruiser Master Cylinder Part Number: 5017973AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5017973AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler PT Cruiser Submodels:
- Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2004 Chrysler PT Cruiser Brake Master Cylinder Parts and Q&A

Q: How to Bleed a Brake Master Cylinder on 2004 Chrysler PT Cruiser?
A: To bleed the brake master cylinder, hold it in a vise. For non-ABS units, connect four bleed tubes to the ports and immerse the ends of the tubes in brake fluid. For ABS units, two specific tubes are used. Fill the reservoir and push on the pistons to get rid of air, then remove the tubes and plug the ports.