Other Name: Seatbelt - Front Outer; Seat Belt Lap and Shoulder Belt, Front Left; Belt & Retractor
Position: Front Driver Side
Item Weight: 2.50 Pounds
Item Dimensions: 11.6 x 5.1 x 5.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: WF571L8AF
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Chrysler PT Cruiser Submodels:
Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
2004 Chrysler PT Cruiser Seat Belt Parts and Q&A
Q: How to Maintain and Fix a Rear Seat Belt and Retractor on 2004 Chrysler PT Cruiser?
A: The starting step is removing the turning loop cover and the turning loop bolt and then both the upper and lower trim bezels and the trim panel attached to the body. Then, loosen and take out the lower seat anchor bolt, insert the seat belt and hardware into the slits in the trim and remove the retractor and belt assembly at the same time. During installation, fit the rear seat belt retractor and attach it with the provided bolt and tighten the bolt to 40 Nm (30 ft. lbs.) Guide the seat belt and its hardware under the trimming piece, afterwards, set in the bolt for the lower anchor and tighten it to 40 Nm (30 ft. lbs.). Install the trim panel first, then each of the two trim bezels and next, fit in each of the turning loop bolts. At last, install the turning loop cover.