How to Service an Exhaust Manifold on 2004 Chrysler Sebring?

To service the exhaust manifold, remove the negative battery cable and raise the vehicle. Remove the exhaust system, rear engine mount, transaxle bracket. Take off heat shield, oxygen and manifold. Clean surfaces, check for flatness and cracks and then install a new gasket and reassemble.

OEM 2004 Chrysler Sebring Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Manifolds found

View related parts
2004 Chrysler Sebring Exhaust Manifold Part Number: MR597478
Product Specifications
- Other Name: Manifold - Exhaust; Catalytic Converter with Integrated Exhaust Manifold; Manifold Exhaust
- Item Weight: 14.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR597478
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2004 Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: MR481816
Product Specifications
- Other Name: Manifold - Exhaust Right; Exhaust Manifold, Right; Manifold Exhaust Right
- Position: Passenger Side
- Item Weight: 9.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR481816
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Exhaust Manifold, Driver Side Part Number: MR481815
Product Specifications
- Other Name: Manifold - Exhaust Left; Exhaust Manifold, Left; Manifold Exhaust Left
- Position: Driver Side
- Item Weight: 9.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR481815
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS
View related parts
2004 Chrysler Sebring Exhaust Manifold Part Number: 4792538AA
Product Specifications
- Other Name: Manifold - Exhaust; Manifold; Manifold Exhaust Manifold For Edv Engine Is Part Of Turbo Assembly; Manifold Exhaust
- Item Weight: 15.60 Pounds
- Item Dimensions: 14.3 x 14.3 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792538AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: 4792387AB
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 8.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792387AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Exhaust Manifold, Passenger Side Part Number: 4792386AB
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left, Right; Manifold; Manifold Exhaust
- Position: Passenger Side
- Item Weight: 8.30 Pounds
- Item Dimensions: 14.3 x 8.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792386AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2004 Chrysler Sebring Exhaust Manifold Parts and Q&A

Q: How to Service an Exhaust Manifold on 2004 Chrysler Sebring?
A: To service the exhaust manifold, remove the negative battery cable and raise the vehicle. Remove the exhaust system, rear engine mount, transaxle bracket. Take off heat shield, oxygen and manifold. Clean surfaces, check for flatness and cracks and then install a new gasket and reassemble.