How to Service and Repair a Vacuum Brake Booster on a Left-Hand Drive on 2004 Chrysler Town & Country?

To repair the vacuum brake booster, pump the brake pedal, remove battery cables and remove the battery. Take the master cylinder off of the booster and change the vacuum seal and remove the booster. Reinstall booster, master cylinder and battery and bleed brakes and road test for proper operation.

OEM 2004 Chrysler Town & Country Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Boosters found

View related parts
2004 Chrysler Town & Country Brake Booster Part Number: 4721721AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly; Booster Power Brake
- Item Weight: 0.60 Pounds
- Item Dimensions: 19.4 x 11.7 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721721AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2004 Chrysler Town & Country Brake Booster Part Number: 4721613AA
Product Specifications
- Other Name: Booster - Power Brake; Power Brake Booster; Booster Assembly; Booster Power Brake
- Item Weight: 0.60 Pounds
- Item Dimensions: 16.0 x 12.9 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4721613AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Town & Country Submodels:
- Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

2004 Chrysler Town & Country Brake Booster Parts and Q&A

Q: How to Service and Repair a Vacuum Brake Booster on a Left-Hand Drive on 2004 Chrysler Town & Country?
A: To repair the vacuum brake booster, pump the brake pedal, remove battery cables and remove the battery. Take the master cylinder off of the booster and change the vacuum seal and remove the booster. Reinstall booster, master cylinder and battery and bleed brakes and road test for proper operation.