How to Maintain Your Seat Heater Module on 2004 Dodge Durango?

Before servicing the heated seat module, you should first disconnect the negative terminal of the battery. Pull open the liftgate and get rid of the two trims attached to the upper D-pillar and lower D-pillar. Remove the wire harness connector from the back of the heated seat module, push in the release button to unsnap the seat and pull it out of the car. Attach the packet containing the seat heating module to the D-pillar and link the connector from the wire harness to the new module. Reconnect the negative battery cable, check the heated seats and then put the upper and lower D-pillar trim back.

OEM 2004 Dodge Durango Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heaters found

View related parts
2004 Dodge Durango Seat Cushion Heater, Lower Part Number: 5000013AA
Product Specifications
- Other Name: Pad; Seat Heater Pad, Lower; Heater Cushion; Seat Heater
- Position: Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 10.6 x 6.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000013AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango Seat Back Heater, Upper Part Number: 5000014AA
Product Specifications
- Other Name: Pad; Seat Heater Pad, Front, Upper; Element; Heater Back; Seat Heater
- Position: Upper
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5000014AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2004 Dodge Durango Seat Heater Parts and Q&A

Q: How to Maintain Your Seat Heater Module on 2004 Dodge Durango?
A: Before servicing the heated seat module, you should first disconnect the negative terminal of the battery. Pull open the liftgate and get rid of the two trims attached to the upper D-pillar and lower D-pillar. Remove the wire harness connector from the back of the heated seat module, push in the release button to unsnap the seat and pull it out of the car. Attach the packet containing the seat heating module to the D-pillar and link the connector from the wire harness to the new module. Reconnect the negative battery cable, check the heated seats and then put the upper and lower D-pillar trim back.