OEM 2003 Dodge Durango Seat Heater

2003 Dodge Durango Seat Heater Parts and Q&A

• Q: How to Maintain Your Seat Heater on 2003 Dodge Durango?

  A: You should first unhook and isolate the negative battery cable before handling the seat heater. Remove the seat cushion or back trim cover from the appropriate place, then remove the connector cable from the heated seat cushion or seat back. Cut the wires attached to the faulty heating element so that the cut is level with the original heating element. Remove the adhesive protection from the new element, apply it directly to the foam cushion and avoid folding or creasing it, since these might cause it to fail early. Match the wires from the new heating cable to their places and then attach the negative battery cable and ensure the heated seat works. In the end, fit the socket-base to the 15 mm-19 mm cup by gently pushing on the seat back cover so that the seat wire harness is routed correctly and the slack wire goes into the limited space between the seat back foam and the cover's edge.