Other Name: Boot - Half Shaft; CV Joint Boot Kit, Front Left Outer, Front Right Outer; CV Boot; Outer Boot; Boot Package, Outer CV; Boot Kit Half Shaft Outer; Boot Package, Inner
Position: Front Outer Passenger Side
Item Weight: 1.10 Pounds
Item Dimensions: 6.5 x 4.5 x 4.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4641181
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Grand Caravan Submodels:
Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Front Left Inner, Front Right Inner; CV Boot; Inner Boot; Boots; Boot Package, Inner CV Right W/ABS; Boot Package, Inner CV Left; Boot Kit Half Shaft Inner
Position: Front Inner Passenger Side
Item Weight: 1.20 Pounds
Item Dimensions: 5.6 x 3.9 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4797700
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Grand Caravan Submodels:
Anniversary Edition, Base, C/V, EL, ES, EX, LE, SE, SE Plus, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
Other Name: Boot Kit - Half Shaft; CV Joint Boot Kit, Front Right Inner; CV Boot; Boot Kit Half Shaft Inner
Position: Front Inner Passenger Side
Item Weight: 1.10 Pounds
Item Dimensions: 4.9 x 4.0 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5017781AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Grand Caravan Submodels:
Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
2004 Dodge Grand Caravan CV Boot Parts and Q&A
Q: How to Service and Repair a CV Boot on the Rear Axle on 2004 Dodge Grand Caravan?
A: To repair the Constant Velocity Joint Boot, remove the half shaft and place it in a vise. Remove the CV boot and tripod assembly and clean and install the new boot and clamps. Make sure you have the correct positioning, and keep it in place with the proper tools to reinsert the half shaft back into the vehicle.