JeepParts
My Garage
My Account
Cart
OEM Dodge Grand Caravan CV Boot
Axle Boot- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
16 CV Boots found
Dodge Grand Caravan Boot Kit, Outer Part Number: 4641331
$7.10 MSRP: $9.00You Save: $1.90 (22%)Ships in 1-2 Business Days
Dodge Grand Caravan Boot Kit, Outer Part Number: 5212868
$19.61 MSRP: $24.85You Save: $5.24 (22%)Ships in 1-2 Business Days
Dodge Grand Caravan Inner Boot Part Number: 4641339
Dodge Grand Caravan Axle Boots Part Number: 4641245
Dodge Grand Caravan Outer Boot Part Number: 4641164
Dodge Grand Caravan Boot Kit Part Number: 4505907
Dodge Grand Caravan Boot Kit Part Number: 4384825
Dodge Grand Caravan Boot Kit Part Number: 4384704
Dodge Grand Caravan Outer Boot Part Number: 4778105AB
Dodge Grand Caravan Outer Boot Part Number: 4778108AB
Dodge Grand Caravan CV Boot
Choose OEM CV Boot that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each CV Boot follows strict manufacturing steps to lock in quality and fit. If your Dodge Grand Caravan matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Grand Caravan parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
The CV Boot of the Dodge Grand Caravan is one of those essential parts whose effectiveness is considered to defend the vehicle's CV joints, which play tremendously significant part in transmitting power from the transaxle towards the wheels. This flexible rubber or plastic shoe keeps adequate amount of such lubricants in the joint while, at the same time, keeping dirt and other unwanted particles out of the joint, thus enhancing performance. Dodge Grand Caravan, in years, has employed many types of CV-joints, for instance Rzeppa joints, for the outer ends and tripod or double offset joints for the inner ends. Outboard joints correlate to larger angles of suspension travel while inboard joints provide for changes in shaft length with suspension activity. Thus, CV Boot must be inspected regularly to avoid such cases as cracks and tears that lead to the failure of CV joint and affect the vehicles performance.
Dodge Grand Caravan CV Boot Parts and Q&A
- Q: How to Replace a CV Boot on Dodge Grand Caravan?A:You should remove the driveshaft from the vehicle before changing the outer C/V joint sealing boot. Take off the large boot clamp fixing the C/V joint sealing boot to the housing and toss it out and also remove and throw away the small clamp keeping the outer boot in place around the shaft. Remove the boot from the outer C/V joint housing sheet and move it down the interconnecting shaft. Clean up the area so that the retaining ring is visible on the C/V joint and then spread the ears of the C/V joint to remove the retaining snap ring and take off the outer C/V joint assembly from the interconnecting shaft. When the boot fails, take out the whole unit and clean the outer C/V joint and its connecting joint thoroughly. If wear is visible, the entire driveshaft assembly must be changed, as parts on this unit cannot be fixed. Slide the new seal boot over the interconnecting shaft retaining clamp and then place the replacement outer C/V joint assembly sealing boot on top. Put the assembled outer C/V joint onto the interconnecting shaft by pushing it into place, so the retaining snap ring fits inside the recess. Fill the outer C/V joint assembly housing with one half of the seal boot service package grease and the rest into the actual boot. Install the outer retaining clamp for the C/V joint seal boot onto the interconnecting shaft, keeping the boot so that the interconnecting shaft's thinest groove is the only one to appear. Pull the boot over the interconnecting shaft and use Special Tool C-4975-A to crimp it. See to it that the seal is regular and normal before using your hand to change the shape of the seal, if required. Place the C/V joint lip seal in the groove on the outside of the C/V joint housing and attach the sealing boot to the outside retaining clamp equally. Crimp the side of the seal against the C/V housing using the crimper Special Tool C-4975-A and then put the driven shaft back onto the car.
- Q: How to Service and Repair a CV Boot on the Front Outer Constant Velocity Joint on Dodge Grand Caravan?A:The front outer constant velocity joint boot should be serviced by taking out the halfshaft assembly first. Get rid of the large pinch clamp that keeps the sealing boot to the CV joint and the small clamp that keeps the outer arm's sealing boot to the shaft. Take the sealing boot from the CV joint housing and move it down the interconnecting shaft, before wiping away any grease to show the outer CV joint and shaft. Put the interconnecting shaft into a vise and use a soft-faced hammer and caps to tap loose the CV joint housing from the internal circlip, carefully removing the outer CV joint. Before you slide off the sealing boot, be sure to take off the large circlip from the interconnecting shaft. Check and clean the outer CV joint assembly and the interconnecting joint for excessive wear; if you find wear anywhere, change the halfshaft assembly since you can't replace the parts separately. To install, simply slide a new sealing boot clamp over the interconnecting shaft and then slide the outer CV joint assembly sealing boot over the shaft, so that the raised bead on the boot fits into the groove. Before you put on the joint, place the ends of the splines on the shaft and the CV joint assembly, matching them up. With a soft-faced hammer, tap the end of the stub axle until you hear the outer CV joint seat securely. Seat the outer CV joint assembly so that its cross touches the circlip on the interconnecting shaft. Put the provided grease into the half of the outer CV joint assembly housing and the remaining amount into the sealing boot. Join the sealing boot to the interconnecting shaft clamp evenly, then use Crimping Tool C-4975-A to attach the boot tightly, avoiding making the seal bend or stretch. Put the X-shaped boot for the outer joint over the outer joint housing. Install the holding clamp over the tail of the boot, pushing it on evenly around the joint. Crimp all sides of the holding clamp together with your tool. After that, reattach the halfshaft boot on the vehicle that you removed before.
