How to Remove and Install a Vapor Canister in Relation to the Leak Detection Pump on 2004 Jeep Wrangler?

All three of these components-the Leak Detection Pump, LDP Filter and EVAP canister-are fastened to the same support bracket that is placed behind the right rear tire under the plastic wheelhouse liner. You should use the same steps for removing and installing the Leak Detection Pump when removing the EVAP canister. When putting in the EVAP canister, use the same steps mentioned in the Leak Detection Pump Removal/Installation procedure.

OEM 2004 Jeep Wrangler Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vapor Canister found

View related parts
2004 Jeep Wrangler Vapor Canister Part Number: 52109503AB
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Item Weight: 2.70 Pounds
- Item Dimensions: 15.6 x 10.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52109503AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Wrangler Submodels:
- Rubicon, SE, Sahara, Sport, Unlimited, X | 4 Cyl 2.4 L GAS, 6 Cyl 4.0 L GAS

2004 Jeep Wrangler Vapor Canister Parts and Q&A

Q: How to Remove and Install a Vapor Canister in Relation to the Leak Detection Pump on 2004 Jeep Wrangler?
A: All three of these components-the Leak Detection Pump, LDP Filter and EVAP canister-are fastened to the same support bracket that is placed behind the right rear tire under the plastic wheelhouse liner. You should use the same steps for removing and installing the Leak Detection Pump when removing the EVAP canister. When putting in the EVAP canister, use the same steps mentioned in the Leak Detection Pump Removal/Installation procedure.