How to Properly Service Your Wiper Blade on a 2005 Chrysler Crossfire?

Question

Accepted Answer

Pull up the wiper arm and move it to the service position to service your wiper. Pull the tab on the wiper blade release and move the wiper away from the arm. With a small screwdriver, lift the retainer springs out of their place and pull them away from the wiper blade's opposite end. Release the wiper element from its place and slide it away by pulling on the bars along the frame until you can remove it. Position the wiper on top of the rubber blade and push it in through the guides onto the wiper mount. The retainer springs should be installed by slipping them onto both sides of the wiper blade and then fitting the springs into place in the retention slots. Lastly, place the blade on top of the arm until it is seated and raise the arm to set it back in its place.

OEM 2005 Chrysler Crossfire Wiper Blade

2 Wiper Blades found

2005 Chrysler Crossfire Wiper Blade, Driver Side Part Number: 5189812AA

2005 Chrysler Crossfire Wiper Blade, Passenger Side Part Number: 5189813AA

2005 Chrysler Crossfire Wiper Blade Parts and Q&A

Related 2005 Chrysler Crossfire Parts

Alternate Year Models