How to Maintain Your Wiper Blade on 2004 Chrysler Crossfire?

Before servicing the blade, first pull up the arm and set the blade in the service position. Press the soft tab and take the wiper blade outward along the wiper arm. Lightly push the retainer springs from their slots with a small screwdriver, then pull them by grabbing hold of them near the opposite edge of the wiper blade. Take off the wiper element by pulling it out of the slots on the blade while it's still attached to the wiper arms. Slide the wiper element onto the blade of the wiper so it fits into the guides and securely into the blades' clips. Put the retainer springs on the ends of the wiper blade and adjust them into the spaces on the inside. After that, fit the wiper blade onto the arm until it is tight and slowly turn the wiper arm up.

OEM 2004 Chrysler Crossfire Wiper Blade

Windshield Wiper Blade

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Blades found

View related parts
2004 Chrysler Crossfire Wiper Blade, Driver Side Part Number: 5189812AA
$7.89 MSRP: $10.00
You Save: $2.11 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade; Windshield Wiper Blade, Left
- Position: Driver Side
- Replaces: 5099161AA
- Item Weight: 0.80 Pounds
- Item Dimensions: 20.7 x 1.7 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189812AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 3.2L V6, 6 Cyl 3.2 L GAS
View related parts
2004 Chrysler Crossfire Wiper Blade, Passenger Side Part Number: 5189813AA
Product Specifications
- Other Name: Blade; Windshield Wiper Blade, Right
- Position: Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 19.8 x 1.5 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5189813AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2004 Chrysler Crossfire Wiper Blade Parts and Q&A

Q: How to Maintain Your Wiper Blade on 2004 Chrysler Crossfire?
A: Before servicing the blade, first pull up the arm and set the blade in the service position. Press the soft tab and take the wiper blade outward along the wiper arm. Lightly push the retainer springs from their slots with a small screwdriver, then pull them by grabbing hold of them near the opposite edge of the wiper blade. Take off the wiper element by pulling it out of the slots on the blade while it's still attached to the wiper arms. Slide the wiper element onto the blade of the wiper so it fits into the guides and securely into the blades' clips. Put the retainer springs on the ends of the wiper blade and adjust them into the spaces on the inside. After that, fit the wiper blade onto the arm until it is tight and slowly turn the wiper arm up.