How to Remove and Install Car Speakers in the Instrument Panel on 2005 Chrysler Pacifica?

You should isolate the battery negative cable before trying to remove the instrument panel speaker. Then, pull off the speaker grill from the instrument panel and take out all the mounting screws. Take off the connecting harness and remove the speaker. Match the ends of the wires and feed the connector back through the hole. After that, snap the speaker to the top of the instrument panel. Place the fasteners into the mounting holes and turn them until the fasteners are secure to 3 N.m (28 in. lbs.). When done, reattach the grill of the speaker and link the battery negative cord again.

OEM 2005 Chrysler Pacifica Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Car Speakers found

View related parts
2005 Chrysler Pacifica Front Driver Speaker, Rear Part Number: 4685967AD
Product Specifications
- Other Name: Speaker; Speaker, Front, Rear; Rear Driver Speaker; Speaker Door
- Position: Rear
- Replaces: 4685967AC
- Item Weight: 2.60 Pounds
- Item Dimensions: 10.6 x 8.0 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685967AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Chrysler Pacifica Tweeter Part Number: 4685965AC
Product Specifications
- Other Name: Speaker - Tweeter; Speaker Tweeter
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685965AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Chrysler Pacifica Woofer Part Number: 4685972AB
Product Specifications
- Other Name: Speaker - Sub Woofer; Speaker; Speaker Sub Woofer
- Item Weight: 5.70 Pounds
- Item Dimensions: 10.7 x 10.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685972AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2005 Chrysler Pacifica Car Speakers Parts and Q&A

Q: How to Remove and Install Car Speakers in the Instrument Panel on 2005 Chrysler Pacifica?
A: You should isolate the battery negative cable before trying to remove the instrument panel speaker. Then, pull off the speaker grill from the instrument panel and take out all the mounting screws. Take off the connecting harness and remove the speaker. Match the ends of the wires and feed the connector back through the hole. After that, snap the speaker to the top of the instrument panel. Place the fasteners into the mounting holes and turn them until the fasteners are secure to 3 N.m (28 in. lbs.). When done, reattach the grill of the speaker and link the battery negative cord again.