How to Replace and Adjust a Front Wiper Arm on 2005 Chrysler Pacifica?

Before replacing the wiper arms, remove the specially-designed trim stick with the part's number C-4755 and gently lift the metal mounting nut off the arm. Then, take out the small nut that holds the wiper arm to the pivot on the wiper arm. To separate the wiper arm from the pivot, chose the proper two jaw puller. Put the wiper arm into place on the pivot and make certain the wiper blades are pointed to the tick marks you see at the edge of the windshield. After securing the wiper arm with its nut, press down hard on the nut cover over the wiper pivot. Lastly, adjust the wiper arms, if necessary and test the vehicle and all of its systems.

OEM 2005 Chrysler Pacifica Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
2005 Chrysler Pacifica Wiper Arm, Driver Side Part Number: 5102237AA
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Wiper
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102237AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Chrysler Pacifica Wiper Arm, Passenger Side Part Number: 5102236AA
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Wiper
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 22.1 x 2.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102236AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2005 Chrysler Pacifica Wiper Arm, Rear Part Number: 5102241AA
Product Specifications
- Other Name: Arm Wiper - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Liftgate Wiper; Arm Rear Wiper
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.5 x 2.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102241AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2005 Chrysler Pacifica Wiper Arm Parts and Q&A

Q: How to Replace and Adjust a Front Wiper Arm on 2005 Chrysler Pacifica?
A: Before replacing the wiper arms, remove the specially-designed trim stick with the part's number C-4755 and gently lift the metal mounting nut off the arm. Then, take out the small nut that holds the wiper arm to the pivot on the wiper arm. To separate the wiper arm from the pivot, chose the proper two jaw puller. Put the wiper arm into place on the pivot and make certain the wiper blades are pointed to the tick marks you see at the edge of the windshield. After securing the wiper arm with its nut, press down hard on the nut cover over the wiper pivot. Lastly, adjust the wiper arms, if necessary and test the vehicle and all of its systems.