How to Replace a Rear Wiper Arm on 2006 Chrysler Pacifica?

Unscrew the rear wiper arm nut cover by pivoting it out from under the wiper and remove the factory retaining nut after that. After that, lift the wiper arm from the rear window and gently move it back and forth until it releases or use a proper battery terminal puller to take it off the rear motor. Put the rear wiper arm onto the rear wiper motor shaft and make sure the wiper blade sits above the lower EBL line. Secure the rear wiper arm retaining nut using 9 ± 1.5 Nm (80 ± 15 in. lbs.), flip down the nut cover and the work is done. In the end, inspect the wiper arm and change its position as needed.

OEM 2006 Chrysler Pacifica Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
2006 Chrysler Pacifica Wiper Arm, Driver Side Part Number: 5102237AA
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Left; Front Arm; Arm Wiper
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102237AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Wiper Arm, Passenger Side Part Number: 5102236AA
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Right; Front Arm; Arm Wiper
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 22.1 x 2.3 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102236AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2006 Chrysler Pacifica Wiper Arm, Rear Part Number: 5102241AA
Product Specifications
- Other Name: Arm Wiper - Rear Wiper; Back Glass Wiper Arm; Rear Arm; Arm Liftgate Wiper; Arm Rear Wiper
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.5 x 2.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5102241AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2006 Chrysler Pacifica Wiper Arm Parts and Q&A

Q: How to Replace a Rear Wiper Arm on 2006 Chrysler Pacifica?
A: Unscrew the rear wiper arm nut cover by pivoting it out from under the wiper and remove the factory retaining nut after that. After that, lift the wiper arm from the rear window and gently move it back and forth until it releases or use a proper battery terminal puller to take it off the rear motor. Put the rear wiper arm onto the rear wiper motor shaft and make sure the wiper blade sits above the lower EBL line. Secure the rear wiper arm retaining nut using 9 ± 1.5 Nm (80 ± 15 in. lbs.), flip down the nut cover and the work is done. In the end, inspect the wiper arm and change its position as needed.