Other Name: Lighter - Cigar Lighter; 12 Volt Accessory Power Outlet, Center; Cigarette Lighter Element, Front.; Lighter Assembly; Knob & Element for Cigar Lighter; Cigarette Lighter.
Position: Front
Replaces: 4685536AB, 5ZN46DX9AA, 5ZN46LXHAA
Item Weight: 0.50 Pounds
Item Dimensions: 1.4 x 1.3 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4685536
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
Base, C/V, ES, Ec, LE, SE, SXT, Sport | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, BATTERY EV (EV/BEV)
Other Name: Lighter; 12 Volt Accessory Power Outlets: Rear Right, Rear Left, Center, Front, Rear; Housing; Cigarette Lighter Socket.; Power Outlet Mount; Armrest Outlet; Power Outlet Cigar; Power Outlet Power
Position: Center
Replaces: 4793554AB
Item Weight: 0.40 Pounds
Item Dimensions: 6.2 x 4.2 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4793554AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
Base, C/V, SE, SXT, Sport | 2.4L L4, 3.3L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
Other Name: Outlet; 12 Volt Accessory Power Outlet Housing, Front; Center; Cigarette Lighter Socket.; Lighter Socket; Power Outlet Base; Cigar Lighter Base; Serviced Without Cap.
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
Base, C/V, ES, Ec, LE, SE, SXT, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, BATTERY EV (EV/BEV)
2005 Dodge Caravan Cigarette Lighter Parts and Q&A
Q: How to Service the Cigarette Lighter Power Outlet on 2005 Dodge Caravan?
A: To service the auxiliary cigarette lighter, disconnect the battery negative cable. Use snap ring pliers to disconnect the base, and then disconnect the wires. For installation, place the mounting ring in the correct position, attach the wires and push the base into the bezel until it locks. Finally, check for operation and install the outlet cap.