Other Name: Seat Belt-3 Passenger Inner; Seat Belt Receptacle, Rear Left; Latch; Seat Belt 3 Passenger Inner
Position: Rear Inner
Item Weight: 1.40 Pounds
Item Dimensions: 7.4 x 4.2 x 3.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: RK991D5AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
Base, C/V, SE, SXT | 4 Cyl 2.4 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
| Page 1 of 2 |Next >
1-20 of 40 Results
2005 Dodge Caravan Seat Belt Parts and Q&A
Q: How to Maintain and Fix the Second Row Right Outboard Seat Belt Retractor on 2005 Dodge Caravan?
A: Take out the first and second rows seats before you proceed to remove the first row seat belt both it's top and lower bolt attachments. After that, remove the liftgate sill plate and upper liftgate trim and then unscrew the second seat belt lower and upper anchor bolt. Next, remove the D-pillar trim cover and unplug the speaker. You will find that the left has the speaker in the trim inside the D-pillar, but the right side has it in the rear of the quarter trim panel, behind the trim after you remove the D-pillar trim and check the rear of the car. You should remove the quarter trim bolster, undo the screws and the quarter trim panel before removing the retired retaining bolt to reach the second row seat belt and retractor. To install the second row seat belt, retractor comes first, setting the bolt at 39 Nm or 29 ft. lbs., next set the screws for the quarter trim panel and finally the quarter trim bolster. Reattach the speaker cord, put the D-pillar trim over the opening and tighten both lower anchor bolts on the second seat to 39 Nm (29 ft. lbs.), then secure the second seatbelt upper turning to the same torque as the lower bolts. Next, install the upper trim for the rear liftgate, the location plate under it, the first row seat belt anchor bolt, all tightened to 39 Nm (29 ft. lbs.) and the first and second row seats.