How to Service a MAP Sensor on 2005 Dodge Caravan?

In order to service the Manifold Pressure/Vacuum Sensor, the negative battery cable is first disconnected followed by the electrical connector and the vacuum hose. Take out the two screws holding the sensor, fit the new sensor and screw them. Re-fit the electrical connector, vacuum hose and lastly, the negative battery cable.

OEM 2005 Dodge Caravan MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 MAP Sensors found

View related parts
2005 Dodge Caravan M.A.P. Sensor Part Number: 56041018AD
$97.73 MSRP: $149.00
You Save: $51.27 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 56041018AC
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56041018AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
- Base, C/V, SE, SXT | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2005 Dodge Caravan M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Caravan Submodels:
- SE | 2.4L L4, 4 Cyl 2.4 L GAS

2005 Dodge Caravan MAP Sensor Parts and Q&A

Q: How to Service a MAP Sensor on 2005 Dodge Caravan?
A: In order to service the Manifold Pressure/Vacuum Sensor, the negative battery cable is first disconnected followed by the electrical connector and the vacuum hose. Take out the two screws holding the sensor, fit the new sensor and screw them. Re-fit the electrical connector, vacuum hose and lastly, the negative battery cable.