Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 Dodge Dakota Hood Hinge

Hood Bracket Hinge
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

  • 2005 Dodge Dakota Hood Hinge - 55176928AE
    2005 Dodge Dakota Hood Hinge Diagram - 55176928AE
    View related parts

    2005 Dodge Dakota Hinge, Front Passenger Side Part Number: 55176928AE

    Product Specifications
    • Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
    • Position: Front Passenger Side
    • Replaces: 55176928AB, 55176928AC, 55176928AD
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 15.4 x 3.3 x 2.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 55176928AE
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2005 Dodge Dakota Hood Hinge - 55176929AC
    2005 Dodge Dakota Hood Hinge Diagram - 55176929AC
    View related parts

    2005 Dodge Dakota Hinge, Front Driver Side Part Number: 55176929AC

    Product Specifications
    • Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
    • Position: Front Driver Side
    • Replaces: 55176929AB
    • Item Weight: 2.00 Pounds
    • Item Dimensions: 15.4 x 3.0 x 2.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 55176929AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Dakota Submodels:
    • Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2005 Dodge Dakota Hood Hinge Parts and Q&A

  • Q: How to Replace a Hood Hinge Without Removing the Hood on 2005 Dodge Dakota?
    A: One or two worn hood hinges can be swapped out without removing the hood; only the hinges need to be accessed. Open the hood and stand on the side that will get the hinge change. Draw the spots for attaching bolts and hinges onto the door, so you can find them again during the installation. Take out the support cylinder from the upper hinge of the door. Then, unscrew the nuts that connect the hinge to the hood and inside the engine bay, pull out the two hinge bolts. Glide the hinge away from the body of the vehicle and lift it off the rail. Put the new hinge onto the fender rail, changing the hinge position as needed to line up with the marks. Put in the two hinge bolts from within the engine bay. Tighten the rear one to 20 N.m and the front one to 20 N.m. Next, attach nuts to the hinge on the hood and tighten them to 23 N.m. After that, put back the support cylinder and review the fit of the hood before settling any adjustments required.

Related 2005 Dodge Dakota Parts

Alternate Year Models

+
2004 Dodge Dakota Hood Hinge 2006 Dodge Dakota Hood Hinge