Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 Dodge Durango Power Steering Pump

Power Steering Pump Unit
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Steering Pumps found

  • 2005 Dodge Durango Power Steering Pump - 52113239AJ
    2005 Dodge Durango Power Steering Pump Diagram - 52113239AJ
    View related parts

    2005 Dodge Durango Power Steering Pump Part Number: 52113239AJ

    Product Specifications
    • Other Name: Pump - Power Steering
    • Replaces: 52113239AI, 52113239AF, 52113239AG, 52113239AC, 52113239AH, 52113239AE, 52113239AB
    • Item Weight: 8.40 Pounds
    • Item Dimensions: 12.9 x 12.4 x 5.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52113239AJ
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Durango Submodels:
    • Adventurer, Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
  • 2005 Dodge Durango Power Steering Pump - 52013976AD
    2005 Dodge Durango Power Steering Pump Diagram - 52013976AD
    View related parts

    2005 Dodge Durango Power Steering Pump Part Number: 52013976AD

    Product Specifications
    • Other Name: Pump - Power Steering; Pump Assembly
    • Replaces: 52113240AG, 52113240AC, 52013976AC, 52013976AB, 52113240AE, 52113240AB, 52113240AF, 52113240AH
    • Item Weight: 5.20 Pounds
    • Item Dimensions: 13.5 x 12.2 x 5.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52013976AD
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2005 Dodge Durango Submodels:
    • Adventurer, Limited, SE, SLT, ST, SXT | 5.7L V8, 8 Cyl 5.7 L GAS

2005 Dodge Durango Power Steering Pump Parts and Q&A

  • Q: How to Maintain and Fix a Power Steering Pump on 2005 Dodge Durango?
    A: The first step in servicing a power steering pump is to drain and siphon out all of the fluid from inside the pump. Then, remove the drive belt from the serpentine, plus the return hose at the reservoir as well as the pressure hose from the pump. After that, remove the three pump mounting bolts from the access hole in the pulley and slide the pump out of the engine. To install, place the pump in line with the engine mounting holes and feed the three bolts through the pulley access holes. Tighten them to 28 Nm (21 ft. lbs.). After finishing the belt installation, hook the pressure line of the pump and ensure it holds 31 Nm (23 ft. lbs.), then link the return hose from the reservoir back to it and put the serpentine drive belt in again. You should also fill the power steering pump with fluid when the car is finished.

Related 2005 Dodge Durango Parts

Alternate Year Models

+
2004 Dodge Durango Power Steering Pump 2006 Dodge Durango Power Steering Pump