How to Service an Oil Pan on 2005 Dodge Neon?

Take out the negative battery cable and lift the car up on a hoist before you started servicing the oil pan. Take the engine oil out and remove the oil filter and then pull out the adaptor from the engine's base. Following this, remove the bolt-held structural collar and the intake manifold support bracket, then take out the dust cover from the transaxle. After that, take out the bolts that secure the oil pan and pull off the pan. Be sure to clean the oil pan as well as all sealing areas before you apply a bead of Mopar Silicone Rubber Adhesive Sealant to the oil pump to engine block joint. Lay the new oil pan gasket on the oil pan, set it in place, then tighten the screws to 12 Nm (105 inch lbs.). Fit the transaxle dust cover, the support bracket for the intake manifold and the structural collar. The oil filter adaptor and oil filter should be reinstalled and afterward, lower your vehicle to add the proper oil to the crankcase.

OEM 2005 Dodge Neon Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oil Pans found

View related parts
2005 Dodge Neon Oil Pan Part Number: 4884385AE
$188.08 MSRP: $282.00
You Save: $93.92 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan; Pan Engine Oil
- Replaces: 4884385AD, 4884385AB
- Item Weight: 11.40 Pounds
- Item Dimensions: 8.2 x 13.7 x 26.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884385AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- SRT-4 | 4 Cyl 2.4 L GAS
View related parts
2005 Dodge Neon Oil Pan Part Number: 4777300AE
$192.03 MSRP: $286.00
You Save: $93.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan - Engine Oil; Engine Oil Pan
- Replaces: 4777300AD
- Item Weight: 8.00 Pounds
- Item Dimensions: 21.0 x 11.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4777300AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SXT, Sport | 2.0L L4, 4 Cyl 2.0 L GAS
View related parts
2005 Dodge Neon Differential Cover, Front Part Number: 4659520
Product Specifications
- Other Name: Pan - Transaxle Differential Oil; Automatic Transmission Cover, Front; Pan, Transmission Differential Oil; Pan Transaxle Differential Oil
- Position: Front
- Item Weight: 1.80 Pounds
- Item Dimensions: 18.4 x 16.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4659520
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
- ACR, Base, ES, R/T, SE, SXT | 4 Cyl 2.0 L GAS

2005 Dodge Neon Oil Pan Parts and Q&A

Q: How to Service an Oil Pan on 2005 Dodge Neon?
A: Take out the negative battery cable and lift the car up on a hoist before you started servicing the oil pan. Take the engine oil out and remove the oil filter and then pull out the adaptor from the engine's base. Following this, remove the bolt-held structural collar and the intake manifold support bracket, then take out the dust cover from the transaxle. After that, take out the bolts that secure the oil pan and pull off the pan. Be sure to clean the oil pan as well as all sealing areas before you apply a bead of Mopar Silicone Rubber Adhesive Sealant to the oil pump to engine block joint. Lay the new oil pan gasket on the oil pan, set it in place, then tighten the screws to 12 Nm (105 inch lbs.). Fit the transaxle dust cover, the support bracket for the intake manifold and the structural collar. The oil filter adaptor and oil filter should be reinstalled and afterward, lower your vehicle to add the proper oil to the crankcase.